Problème rencontré au sujet du package net-fs/samba-4.8.6-r2 : /usr/bin/smbd et /usr/bin/nmbd affichent :
samba | * Caching service dependencies …
Service donutsd' needs non existent servicemta’ [ ok ]
samba | * samba -> start: smbd …
samba | * start-stop-daemon: failed to start /usr/sbin/smbd' [ !! ] samba | * samba -> start: nmbd ... samba | * start-stop-daemon: failed to start/usr/sbin/nmbd’ [ !! ]
samba | * Error: starting services (see system logs)
samba | * samba -> stop: smbd …
samba | * start-stop-daemon: no matching processes [ ok ]
samba | * samba -> stop: nmbd …
samba | * start-stop-daemon: no matching processes [ ok ]
samba | * ERROR: samba failed to start
Erreur de segmentation
Problème compilation incompatible avec mon processeur AMD64 ?
Merci de votre soutien.
What does dmesg contain after Segmentation Error?
Bonjour Icerider,
Voilà le contenu de msg lorsque je lance samba :
May 20 09:15:08 calculate /etc/init.d/samba[1044]: start-stop-daemon: failed to start `/usr/sbin/nmbd’
May 20 09:15:08 calculate /etc/init.d/samba[1047]: Error: starting services (see system logs)
May 20 09:15:08 calculate start-stop-daemon[1049]: Will stop /usr/sbin/smbd
May 20 09:15:08 calculate /etc/init.d/samba[1049]: start-stop-daemon: no matching processes found
May 20 09:15:08 calculate start-stop-daemon[1052]: Will stop /usr/sbin/nmbd
May 20 09:15:08 calculate /etc/init.d/samba[1052]: start-stop-daemon: no matching processes found
May 20 09:15:08 calculate /etc/init.d/samba[1019]: ERROR: samba failed to start
En lançant /usr/sbin/nmbd dans une console, j’obtiens le message “Erreur de segmentation”
Autre chose à chercher ailleurs sur le diagnostic système?
Please, display output of command “dmesg”.
Mille excuses, la copie écran de dmesg : partie 1
[ 0.388764] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.388767] pci 0000:00:14.4: PCI bridge to [bus 07]
[ 0.388777] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.388778] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.388780] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.388781] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.388782] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xdfffffff window]
[ 0.388783] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff window]
[ 0.388784] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 0.388785] pci_bus 0000:01: resource 1 [mem 0xfe700000-0xfe8fffff]
[ 0.388786] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.388787] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
[ 0.388788] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 0.388789] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 0.388790] pci_bus 0000:03: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 0.388791] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.388792] pci_bus 0000:04: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.388794] pci_bus 0000:05: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.388795] pci_bus 0000:06: resource 0 [io 0xe000-0xefff]
[ 0.388796] pci_bus 0000:06: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.388797] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7 window]
[ 0.388798] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff window]
[ 0.388799] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.388800] pci_bus 0000:07: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.388801] pci_bus 0000:07: resource 8 [mem 0xcff00000-0xdfffffff window]
[ 0.388802] pci_bus 0000:07: resource 9 [mem 0xf0000000-0xfebfffff window]
[ 0.388875] NET: Registered protocol family 2
[ 0.389029] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
[ 0.389097] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.389374] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.389621] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.389690] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.389774] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.389906] NET: Registered protocol family 1
[ 0.389917] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[ 0.493129] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x69a took 100769 usecs
[ 0.567133] pci 0000:00:12.1: quirk_usb_early_handoff+0x0/0x69a took 72256 usecs
[ 0.641134] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x69a took 72103 usecs
[ 0.715141] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x69a took 72258 usecs
[ 0.789143] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x69a took 72093 usecs
[ 0.789163] pci 0000:01:05.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.789173] pci 0000:01:05.1: Linked as a consumer to 0000:01:05.0
[ 0.789198] pci 0000:04:00.0: async suspend disabled to avoid multi-function power-on ordering issue
[ 0.789202] pci 0000:04:00.1: async suspend disabled to avoid multi-function power-on ordering issue
[ 0.789350] PCI: CLS 64 bytes, default 64
[ 0.789386] Unpacking initramfs…
[ 3.895974] Freeing initrd memory: 46944K
[ 3.895977] PCI-DMA: Disabling AGP.
[ 3.896050] PCI-DMA: aperture base @ c4000000 size 65536 KB
[ 3.896050] PCI-DMA: using GART IOMMU.
[ 3.896052] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 3.898129] LVT offset 1 assigned for vector 0x400
[ 3.898138] LVT offset 1 assigned
[ 3.898199] perf: AMD IBS detected (0x0000001f)
[ 3.898764] Initialise system trusted keyrings
[ 3.898830] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[ 3.900261] zbud: loaded
[ 3.901780] Key type asymmetric registered
[ 3.901782] Asymmetric key parser ‘x509’ registered
[ 3.901804] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 3.901867] io scheduler noop registered
[ 3.901869] io scheduler deadline registered
[ 3.901922] io scheduler cfq registered (default)
[ 3.901923] io scheduler mq-deadline registered
[ 3.901924] io scheduler kyber registered
[ 3.901952] io scheduler bfq registered
[ 3.902666] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.902728] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 3.923417] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 3.924592] lp: driver loaded but no devices found
[ 3.924595] Linux agpgart interface v0.103
[ 3.924619] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 3.924619] vesafb: scrolling: redraw
[ 3.924621] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 3.924635] vesafb: framebuffer at 0xd0000000, mapped to 0x(ptrval), using 3072k, total 3072k
[ 4.016613] Console: switching to colour frame buffer device 128x48
[ 4.108422] fb0: VESA VGA frame buffer device
[ 4.111002] loop: module loaded
[ 4.113474] ahci 0000:00:11.0: version 3.0
[ 4.113733] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 4.113736] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 4.114201] scsi host0: ahci
[ 4.114308] scsi host1: ahci
[ 4.114384] scsi host2: ahci
[ 4.114460] scsi host3: ahci
[ 4.114493] ata1: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffd00 irq 22
[ 4.114495] ata2: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffd80 irq 22
[ 4.114497] ata3: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffe00 irq 22
[ 4.114499] ata4: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffe80 irq 22
[ 4.114721] ahci 0000:04:00.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 4.114723] ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 4.116003] scsi host4: ahci
[ 4.116133] scsi host5: ahci
[ 4.116167] ata5: SATA max UDMA/133 abar m512@0xfeaffc00 port 0xfeaffd00 irq 24
[ 4.116169] ata6: SATA max UDMA/133 abar m512@0xfeaffc00 port 0xfeaffd80 irq 24
[ 4.116234] PPP generic driver version 2.4.2
[ 4.116345] ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver
[ 4.116345] ehci-pci: EHCI PCI platform driver
[ 4.116522] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 4.116599] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 4.116602] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 4.116611] ehci-pci 0000:00:12.2: debug port 1
[ 4.116659] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe6ff800
[ 4.123689] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 4.123749] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 4.123750] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.123752] usb usb1: Product: EHCI Host Controller
[ 4.123753] usb usb1: Manufacturer: Linux 4.19.43-calculate ehci_hcd
[ 4.123753] usb usb1: SerialNumber: 0000:00:12.2
[ 4.123891] hub 1-0:1.0: USB hub found
[ 4.123898] hub 1-0:1.0: 6 ports detected
[ 4.124199] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 4.124262] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 4.124265] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 4.124274] ehci-pci 0000:00:13.2: debug port 1
[ 4.124306] ehci-pci 0000:00:13.2: irq 19, io mem 0xfe6ff400
[ 4.130679] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 4.130721] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 4.130722] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.130723] usb usb2: Product: EHCI Host Controller
[ 4.130724] usb usb2: Manufacturer: Linux 4.19.43-calculate ehci_hcd
[ 4.130725] usb usb2: SerialNumber: 0000:00:13.2
[ 4.130860] hub 2-0:1.0: USB hub found
[ 4.130865] hub 2-0:1.0: 6 ports detected
[ 4.131042] ehci-platform: EHCI generic platform driver
[ 4.131076] usbcore: registered new interface driver usb-storage
[ 4.131104] i8042: PNP: No PS/2 controller found.
[ 4.131104] i8042: Probing ports directly.
[ 4.131533] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.131538] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 4.131660] mousedev: PS/2 mouse device common for all mice
[ 4.131705] rtc_cmos 00:01: RTC can wake from S4
[ 4.131849] rtc_cmos 00:01: registered as rtc0
[ 4.131865] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 4.131880] IR NEC protocol handler initialized
[ 4.131880] IR RC5(x/sz) protocol handler initialized
[ 4.131881] IR RC6 protocol handler initialized
[ 4.131881] IR JVC protocol handler initialized
[ 4.131881] IR Sony protocol handler initialized
[ 4.131882] IR SANYO protocol handler initialized
[ 4.131882] IR Sharp protocol handler initialized
[ 4.131882] IR MCE Keyboard/mouse protocol handler initialized
[ 4.131883] IR XMP protocol handler initialized
[ 4.131898] hidraw: raw HID events driver © Jiri Kosina
[ 4.132010] usbcore: registered new interface driver usbhid
[ 4.132010] usbhid: USB HID core driver
[ 4.132091] NET: Registered protocol family 17
[ 4.132100] Key type dns_resolver registered
[ 4.132271] microcode: CPU0: patch_level=0x010000c8
[ 4.132275] microcode: CPU1: patch_level=0x010000c8
[ 4.132313] microcode: Microcode Update Driver: v2.2.
[ 4.132322] sched_clock: Marking stable (4131556393, 284850)->(4242532408, -110691165)
[ 4.132449] registered taskstats version 1
[ 4.132449] Loading compiled-in X.509 certificates
[ 4.132468] zswap: loaded using pool lzo/zbud
[ 4.132722] rtc_cmos 00:01: setting system clock to 2019-05-19 17:00:29 UTC (1558285229)
[ 4.423429] ata1: SATA link down (SStatus 0 SControl 300)
[ 4.423477] ata6: SATA link down (SStatus 0 SControl 300)
[ 4.423495] ata3: SATA link down (SStatus 0 SControl 300)
[ 4.423528] ata2: SATA link down (SStatus 0 SControl 300)
[ 4.423540] ata5: SATA link down (SStatus 0 SControl 300)
[ 4.443678] usb 1-2: new high-speed USB device number 2 using ehci-pci
[ 4.573138] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice= 7.02
[ 4.573140] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4.573141] usb 1-2: Product: USB2.0 Hub
[ 4.573564] hub 1-2:1.0: USB hub found
[ 4.573882] hub 1-2:1.0: 4 ports detected
[ 4.577700] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.578700] ata4.00: ATAPI: TSSTcorp DVDWBD SH-B123L, SB01, max UDMA/100
[ 4.580080] ata4.00: configured for UDMA/100
[ 4.581198] scsi 3:0:0:0: CD-ROM TSSTcorp DVDWBD SH-B123L SB01 PQ: 0 ANSI: 5
[ 4.616699] sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.616701] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.616847] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 4.617712] Freeing unused kernel image memory: 1056K
[ 4.617716] Write protecting the kernel read-only data: 12288k
[ 4.618425] Freeing unused kernel image memory: 2016K
[ 4.618534] Freeing unused kernel image memory: 284K
[ 4.618540] rodata_test: all tests were successful
[ 4.618545] Run /init as init process
[ 4.680898] dracut: dracut-046
[ 4.863919] dracut: TuxOnIce premodule started
[ 4.864007] dracut: Kernel has no tuxonice support, aborting
[ 4.882982] RPC: Registered named UNIX socket transport module.
[ 4.882983] RPC: Registered udp transport module.
[ 4.882984] RPC: Registered tcp transport module.
[ 4.882984] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 4.911947] NET: Registered protocol family 10
[ 4.922684] tsc: Refined TSC clocksource calibration: 3113.980 MHz
[ 4.922691] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2ce2de802e5, max_idle_ns: 440795347884 ns
[ 4.922705] clocksource: Switched to clocksource tsc
[ 4.934299] Segment Routing with IPv6
[ 4.959942] systemd-udevd[1170]: starting version 3.2.5
[ 4.960128] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 4.960149] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 4.960157] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 4.961617] udevd[1171]: starting eudev-3.2.5
[ 4.981965] dracut: rd.md=0: removing MD RAID activation
[ 5.032934] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 5.033033] ACPI: Power Button [PWRB]
[ 5.033102] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 5.033137] ACPI: Power Button [PWRF]
[ 5.052974] sata_sil24 0000:03:00.0: version 1.1
[ 5.054850] scsi host6: sata_sil24
[ 5.054948] scsi host7: sata_sil24
[ 5.055026] scsi host8: sata_sil24
[ 5.055099] scsi host9: sata_sil24
[ 5.055134] ata7: SATA max UDMA/100 host m128@0xfe9ffc00 port 0xfe9f0000 irq 18
[ 5.055136] ata8: SATA max UDMA/100 host m128@0xfe9ffc00 port 0xfe9f2000 irq 18
[ 5.055138] ata9: SATA max UDMA/100 host m128@0xfe9ffc00 port 0xfe9f4000 irq 18
[ 5.055140] ata10: SATA max UDMA/100 host m128@0xfe9ffc00 port 0xfe9f6000 irq 18
[ 5.060827] pata_jmicron 0000:04:00.1: enabling device (0000 -> 0001)
[ 5.063683] scsi host10: pata_jmicron
[ 5.069671] ohci_hcd: USB 1.1 ‘Open’ Host Controller (OHCI) Driver
[ 5.069718] scsi host11: pata_jmicron
[ 5.069781] ata11: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17
[ 5.069782] ata12: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17
[ 5.070248] ohci-pci: OHCI PCI platform driver
[ 5.070408] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 5.070468] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 5.070498] ohci-pci 0000:00:12.0: irq 16, io mem 0xfe6fe000
[ 5.079666] scsi host12: pata_atiixp
[ 5.081689] r8169 0000:06:00.0: can’t disable ASPM; OS doesn’t have ASPM control
[ 5.084679] scsi host13: pata_atiixp
[ 5.084743] ata13: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 5.084744] ata14: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 5.085769] libphy: r8169: probed
[ 5.086201] r8169 0000:06:00.0 eth0: RTL8168evl/8111evl, 14:da:e9:c5:04:16, XID 2c900800, IRQ 25
[ 5.086202] r8169 0000:06:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 5.092862] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 5.092908] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
[ 5.097260] xhci_hcd 0000:05:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x0000000000080000
[ 5.097414] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 5.097415] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.097416] usb usb4: Product: xHCI Host Controller
[ 5.097417] usb usb4: Manufacturer: Linux 4.19.43-calculate xhci-hcd
[ 5.097418] usb usb4: SerialNumber: 0000:05:00.0
[ 5.097507] hub 4-0:1.0: USB hub found
[ 5.097513] hub 4-0:1.0: 2 ports detected
[ 5.097611] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 5.097638] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 5
[ 5.097644] xhci_hcd 0000:05:00.0: Host supports USB 3.0 SuperSpeed
[ 5.097663] usb usb5: We don’t know the algorithms for LPM for this host, disabling LPM.
[ 5.097680] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[ 5.097681] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.097682] usb usb5: Product: xHCI Host Controller
[ 5.097683] usb usb5: Manufacturer: Linux 4.19.43-calculate xhci-hcd
[ 5.097683] usb usb5: SerialNumber: 0000:05:00.0
[ 5.097756] hub 5-0:1.0: USB hub found
[ 5.097762] hub 5-0:1.0: 2 ports detected
[ 5.126737] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[ 5.126739] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.126740] usb usb3: Product: OHCI PCI host controller
[ 5.126741] usb usb3: Manufacturer: Linux 4.19.43-calculate ohci_hcd
[ 5.126742] usb usb3: SerialNumber: 0000:00:12.0
[ 5.126855] hub 3-0:1.0: USB hub found
[ 5.126864] hub 3-0:1.0: 3 ports detected
[ 5.127138] ohci-pci 0000:00:12.1: OHCI PCI host controller
[ 5.127176] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 6
[ 5.127197] ohci-pci 0000:00:12.1: irq 16, io mem 0xfe6fd000
[ 5.182752] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[ 5.182755] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.182756] usb usb6: Product: OHCI PCI host controller
[ 5.182757] usb usb6: Manufacturer: Linux 4.19.43-calculate ohci_hcd
[ 5.182758] usb usb6: SerialNumber: 0000:00:12.1
[ 5.182944] hub 6-0:1.0: USB hub found
[ 5.182952] hub 6-0:1.0: 3 ports detected
[ 5.183261] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 5.183312] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 7
[ 5.183332] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe6fc000
[ 5.188898] [drm] radeon kernel modesetting enabled.
[ 5.189057] checking generic (d0000000 300000) vs hw (d0000000 10000000)
[ 5.189059] fb: switching to radeondrmfb from VESA VGA
[ 5.189084] Console: switching to colour dummy device 80x25
[ 5.189549] [drm] initializing kernel modesetting (RS780 0x1002:0x9616 0x1043:0x8388 0x00).
[ 5.189574] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000dffff window]
[ 5.189577] caller pci_map_rom+0x65/0x1b0 mapping multiple BARs
[ 5.190136] ATOM BIOS: B27732
[ 5.190153] radeon 0000:01:05.0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used)
[ 5.190154] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[ 5.190160] [drm] Detected VRAM RAM=256M, BAR=256M
[ 5.190160] [drm] RAM width 32bits DDR
[ 5.191264] [TTM] Zone kernel: Available graphics memory: 8086426 kiB
[ 5.191266] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 5.191266] [TTM] Initializing pool allocator
[ 5.191271] [TTM] Initializing DMA pool allocator
[ 5.191294] [drm] radeon: 256M of VRAM memory ready
[ 5.191295] [drm] radeon: 512M of GTT memory ready.
[ 5.191307] [drm] Loading RS780 Microcode
[ 5.191371] [drm] radeon: power management initialized
[ 5.191374] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 5.206217] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
[ 5.206267] radeon 0000:01:05.0: WB enabled
[ 5.206269] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0x(ptrval)
[ 5.206271] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 5.206271] [drm] Driver supports precise vblank timestamp query.
[ 5.206272] radeon 0000:01:05.0: radeon: MSI limited to 32-bit
[ 5.206285] [drm] radeon: irq initialized.
[ 5.238713] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[ 5.238715] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.238716] usb usb7: Product: OHCI PCI host controller
[ 5.238717] usb usb7: Manufacturer: Linux 4.19.43-calculate ohci_hcd
[ 5.238717] usb usb7: SerialNumber: 0000:00:13.0
[ 5.253344] hub 7-0:1.0: USB hub found
[ 5.253351] hub 7-0:1.0: 3 ports detected
[ 5.253466] [drm] ring test on 0 succeeded in 1 usecs
[ 5.253547] [drm] ib test on ring 0 succeeded in 0 usecs
[ 5.253758] [drm] Radeon Display Connectors
[ 5.253759] [drm] Connector 0:
[ 5.253759] [drm] VGA-1
[ 5.253761] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 5.253761] [drm] Encoders:
[ 5.253762] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 5.253762] [drm] Connector 1:
[ 5.253762] [drm] HDMI-A-1
[ 5.253763] [drm] HPD3
[ 5.253764] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 5.253764] [drm] Encoders:
[ 5.253764] [drm] DFP3: INTERNAL_KLDSCP_LVTMA
[ 5.255027] ohci-pci 0000:00:13.1: OHCI PCI host controller
[ 5.255101] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 8
[ 5.255124] ohci-pci 0000:00:13.1: irq 18, io mem 0xfe6fb000
[ 5.256408] ata14.00: ATA-8: Hitachi HDS721010CLA332, JP4OA3MA, max UDMA/133
[ 5.256410] ata14.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 5.310713] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[ 5.310715] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.310716] usb usb8: Product: OHCI PCI host controller
[ 5.310717] usb usb8: Manufacturer: Linux 4.19.43-calculate ohci_hcd
[ 5.310718] usb usb8: SerialNumber: 0000:00:13.1
[ 5.315708] hub 8-0:1.0: USB hub found
[ 5.315715] hub 8-0:1.0: 3 ports detected
[ 5.333637] [drm] fb mappable at 0xD0141000
[ 5.333638] [drm] vram apper at 0xD0000000
[ 5.333638] [drm] size 4325376
[ 5.333639] [drm] fb depth is 24
[ 5.333639] [drm] pitch is 5632
[ 5.333800] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 5.333860] fbcon: radeondrmfb (fb0) is primary device
[ 5.333869] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 9
[ 5.333890] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe6fa000
[ 5.342710] Console: switching to colour frame buffer device 170x48
[ 5.351250] radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device
[ 5.356695] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:05.0 on minor 0
[ 5.389748] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[ 5.389750] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.389752] usb usb9: Product: OHCI PCI host controller
[ 5.389753] usb usb9: Manufacturer: Linux 4.19.43-calculate ohci_hcd
[ 5.389753] usb usb9: SerialNumber: 0000:00:14.5
[ 5.389942] hub 9-0:1.0: USB hub found
[ 5.389950] hub 9-0:1.0: 2 ports detected
[ 5.530679] usb 1-2.3: new low-speed USB device number 4 using ehci-pci
[ 5.537686] usb 4-2: new low-speed USB device number 2 using xhci_hcd
[ 5.577679] usb 6-2: new full-speed USB device number 2 using ohci-pci
[ 5.613477] usb 1-2.3: New USB device found, idVendor=093a, idProduct=2521, bcdDevice= 1.00
[ 5.613480] usb 1-2.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 5.613481] usb 1-2.3: Product: USB OPTICAL MOUSE
[ 5.617532] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.3/1-2.3:1.0/0003:093A:2521.0001/input/input5
[ 5.617631] hid-generic 0003:093A:2521.0001: input,hidraw0: USB HID v1.11 Mouse [USB OPTICAL MOUSE] on usb-0000:00:12.2-2.3/input0
[ 5.735043] usb 4-2: New USB device found, idVendor=046d, idProduct=c512, bcdDevice=30.07
[ 5.735045] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.735046] usb 4-2: Product: USB Receiver
[ 5.735047] usb 4-2: Manufacturer: Logitech
[ 5.741574] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:07.0/0000:05:00.0/usb4/4-2/4-2:1.0/0003:046D:C512.0002/input/input6
[ 5.742699] usb 6-2: New USB device found, idVendor=04f9, idProduct=01fd, bcdDevice= 1.00
[ 5.742701] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.742702] usb 6-2: Product: MFC-290C
[ 5.742703] usb 6-2: Manufacturer: Brother
[ 5.742704] usb 6-2: SerialNumber: BROL8F142608
[ 5.744839] usb-storage 6-2:1.2: USB Mass Storage device detected
[ 5.744988] scsi host14: usb-storage 6-2:1.2
[ 5.793000] logitech 0003:046D:C512.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:05:00.0-2/input0
[ 5.799244] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:07.0/0000:05:00.0/usb4/4-2/4-2:1.1/0003:046D:C512.0003/input/input7
[ 5.850983] logitech 0003:046D:C512.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:05:00.0-2/input1
la copie écran de dmesg : partie 2
[ 6.801708] scsi 14:0:0:0: Direct-Access Brother MFC-290C 1.00 PQ: 0 ANSI: 2
[ 6.849698] usb usb6-port3: Cannot enable. Maybe the USB cable is bad?
[ 6.882692] sd 14:0:0:0: [sda] Attached SCSI removable disk
[ 7.145692] ata7: SATA link down (SStatus 0 SControl 0)
[ 7.301620] random: fast init done
[ 7.833696] usb usb6-port3: Cannot enable. Maybe the USB cable is bad?
[ 7.833777] usb usb6-port3: attempt power cycle
[ 9.129691] usb usb6-port3: Cannot enable. Maybe the USB cable is bad?
[ 9.249689] ata8: SATA link down (SStatus 0 SControl 0)
[ 10.113692] usb usb6-port3: Cannot enable. Maybe the USB cable is bad?
[ 10.113772] usb usb6-port3: unable to enumerate USB device
[ 11.353691] ata9: SATA link down (SStatus 0 SControl 0)
[ 13.467771] ata10: SATA link up 1.5 Gbps (SStatus 113 SControl 0)
[ 13.468924] ata10.00: ATAPI: HL-DT-ST DVDRAM GH24NSD1, LG00, max UDMA/133
[ 13.470336] ata10.00: configured for UDMA/100
[ 13.482434] scsi 9:0:0:0: CD-ROM HL-DT-ST DVDRAM GH24NSD1 LG00 PQ: 0 ANSI: 5
[ 13.521672] sr 9:0:0:0: [sr1] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[ 13.521848] sr 9:0:0:0: Attached scsi CD-ROM sr1
[ 13.695330] scsi 13:0:0:0: Direct-Access ATA Hitachi HDS72101 A3MA PQ: 0 ANSI: 5
[ 13.695695] sd 13:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 13.695704] sd 13:0:0:0: [sdb] Write Protect is off
[ 13.695705] sd 13:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 13.695717] sd 13:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
[ 13.734736] sdb: sdb1 sdb2 sdb4 sdb5
[ 13.735148] sd 13:0:0:0: [sdb] Attached SCSI disk
[ 14.203954] dracut: TuxOnIce lvmfix started
[ 14.207126] dracut: TuxOnIce udev should be now fully settled
[ 14.267414] EXT4-fs (sdb2): INFO: recovery required on readonly filesystem
[ 14.267415] EXT4-fs (sdb2): write access will be enabled during recovery
[ 14.562323] EXT4-fs (sdb2): recovery complete
[ 14.578131] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[ 14.620682] random: crng init done
[ 14.620685] random: 6 urandom warning(s) missed due to ratelimiting
[ 14.632485] dracut: Remounting /dev/disk/by-uuid/e7801318-9ab6-458b-882f-13624f28f583 with -o noatime,ro
[ 14.633742] EXT4-fs (sdb2): re-mounted. Opts: (null)
[ 14.869431] dracut: Mounted root filesystem /dev/sdb2
[ 14.886449] EXT4-fs (sdb2): re-mounted. Opts: (null)
[ 14.978119] EXT4-fs (sdb2): re-mounted. Opts: (null)
[ 15.244475] dracut: Switching root
[ 19.678345] udevd[3111]: starting version 3.2.5
[ 20.041313] udevd[3111]: unknown key ‘SYSFS{idVendor}’ in /etc/udev/rules.d/41-brother-libsane-type1-inst.rules:14
[ 20.041317] udevd[3111]: invalid rule ‘/etc/udev/rules.d/41-brother-libsane-type1-inst.rules:14’
[ 20.519504] udevd[3111]: starting eudev-3.2.5
[ 20.521176] udevd[3111]: unknown key ‘SYSFS{idVendor}’ in /etc/udev/rules.d/41-brother-libsane-type1-inst.rules:14
[ 20.521178] udevd[3111]: invalid rule ‘/etc/udev/rules.d/41-brother-libsane-type1-inst.rules:14’
[ 20.767209] acpi_cpufreq: overriding BIOS provided _PSD data
[ 20.807290] ATK0110 ATK0110:00: Overriding interface detection
[ 21.066774] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 21.069048] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:05.1/sound/card1/input8
[ 21.069587] snd_hda_codec_via hdaudioC0D0: autoconfig for VT1708S: line_outs=4 (0x1c/0x19/0x22/0x23/0x0) type:line
[ 21.069588] snd_hda_codec_via hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 21.069590] snd_hda_codec_via hdaudioC0D0: hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
[ 21.069590] snd_hda_codec_via hdaudioC0D0: mono: mono_out=0x0
[ 21.069591] snd_hda_codec_via hdaudioC0D0: dig-out=0x20/0x21
[ 21.069592] snd_hda_codec_via hdaudioC0D0: inputs:
[ 21.069603] snd_hda_codec_via hdaudioC0D0: Rear Mic=0x1a
[ 21.069604] snd_hda_codec_via hdaudioC0D0: Front Mic=0x1e
[ 21.069605] snd_hda_codec_via hdaudioC0D0: Line=0x1b
[ 21.081666] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 21.081729] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 21.081777] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 21.081825] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[ 21.081870] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
[ 21.081915] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
[ 21.081960] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input15
[ 21.082005] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input16
[ 21.096526] parport_pc 00:02: reported by Plug and Play ACPI
[ 21.096596] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 21.177826] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 21.189918] lp0: using parport0 (interrupt-driven).
[ 21.481738] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 21.522617] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SOR1) (20180810/utaddress-213)
[ 21.522627] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B2F (_SB.PCI0.SBRG.ASOC.SMRG) (20180810/utaddress-213)
[ 21.522632] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B2F (\SMRG) (20180810/utaddress-213)
[ 21.522637] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 21.555736] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[ 21.764849] kvm: Nested Virtualization enabled
[ 21.764853] kvm: Nested Paging enabled
[ 21.785673] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 21.982406] ppdev: user-space parallel port driver
[ 22.089704] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 22.393753] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 22.697864] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 22.858434] vboxdrv: loading out-of-tree module taints kernel.
[ 22.871431] vboxdrv: Found 2 processor cores
[ 22.889013] vboxdrv: TSC mode is Invariant, tentative frequency 3113994864 Hz
[ 22.889014] vboxdrv: Successfully loaded version 6.0.6 (interface 0x00290008)
[ 23.001721] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 23.061280] VBoxNetFlt: Successfully started.
[ 23.073317] VBoxNetAdp: Successfully started.
[ 23.085567] VBoxPciLinuxInit
[ 23.099527] vboxpci: IOMMU not found (not registered)
[ 23.305720] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 23.609736] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 24.236131] EXT4-fs (sdb2): re-mounted. Opts: (null)
[ 24.420318] Adding 16149928k swap on /dev/sdb1. Priority:-2 extents:1 across:16149928k FS
[ 24.649978] EXT4-fs (sdb5): recovery complete
[ 24.667180] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[ 30.630253] fuse init (API version 7.27)
[ 30.975394] Bluetooth: Core ver 2.22
[ 30.975420] NET: Registered protocol family 31
[ 30.975421] Bluetooth: HCI device and connection manager initialized
[ 30.975426] Bluetooth: HCI socket layer initialized
[ 30.975429] Bluetooth: L2CAP socket layer initialized
[ 30.975436] Bluetooth: SCO socket layer initialized
[ 31.035925] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 31.035930] Bluetooth: BNEP filters: protocol multicast
[ 31.035939] Bluetooth: BNEP socket layer initialized
[ 32.073859] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 32.092198] RTL8211E Gigabit Ethernet r8169-600:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-600:00, irq=IGNORE)
[ 32.286101] r8169 0000:06:00.0 eth0: Link is Down
[ 32.286231] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 34.322936] r8169 0000:06:00.0 eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 34.322952] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 37.214133] Key type encrypted registered
[ 41.260075] smbd[5383]: segfault at 18 ip 00007f80e56b9807 sp 00007ffea76ea640 error 4 in libc-2.28.so[7f80e5696000+1c8000]
[ 41.260094] Code: 00 00 00 31 ff 89 d0 0f 05 eb f8 31 c0 eb 8f 4c 8b a8 a0 01 00 00 48 8b 05 f6 85 3a 00 45 31 e4 48 8b 28 48 81 c5 78 04 00 00 <49> 8b 45 18 48 85 c0 74 05 48 89 ef ff d0 41 83 c4 01 4d 8b 6d 40
[ 41.534475] nmbd[5398]: segfault at 18 ip 00007f6c23a11807 sp 00007ffd8d3b9240 error 4 in libc-2.28.so[7f6c239ee000+1c8000]
[ 41.534486] Code: 00 00 00 31 ff 89 d0 0f 05 eb f8 31 c0 eb 8f 4c 8b a8 a0 01 00 00 48 8b 05 f6 85 3a 00 45 31 e4 48 8b 28 48 81 c5 78 04 00 00 <49> 8b 45 18 48 85 c0 74 05 48 89 ef ff d0 41 83 c4 01 4d 8b 6d 40
[ 484.695499] testparm[7541]: segfault at 18 ip 00007f0221349807 sp 00007ffe64f10cf0 error 4 in libc-2.28.so[7f0221326000+1c8000]
[ 484.695508] Code: 00 00 00 31 ff 89 d0 0f 05 eb f8 31 c0 eb 8f 4c 8b a8 a0 01 00 00 48 8b 05 f6 85 3a 00 45 31 e4 48 8b 28 48 81 c5 78 04 00 00 <49> 8b 45 18 48 85 c0 74 05 48 89 ef ff d0 41 83 c4 01 4d 8b 6d 40
[ 485.923239] net[7542]: segfault at 18 ip 00007f25a1115807 sp 00007ffd391c7a90 error 4 in libc-2.28.so[7f25a10f2000+1c8000]
[ 485.923249] Code: 00 00 00 31 ff 89 d0 0f 05 eb f8 31 c0 eb 8f 4c 8b a8 a0 01 00 00 48 8b 05 f6 85 3a 00 45 31 e4 48 8b 28 48 81 c5 78 04 00 00 <49> 8b 45 18 48 85 c0 74 05 48 89 ef ff d0 41 83 c4 01 4d 8b 6d 40
[ 629.280197] tun: Universal TUN/TAP device driver, 1.6
[ 657.851908] Installing knfsd (copyright © 1996 okir@monad.swb.de).
[ 657.931809] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 657.932042] NFSD: starting 90-second grace period (net f0000098)
[ 705.999085] smbd[10016]: segfault at 18 ip 00007f0aa4b4d807 sp 00007ffdee0321d0 error 4 in libc-2.28.so[7f0aa4b2a000+1c8000]
[ 705.999091] Code: 00 00 00 31 ff 89 d0 0f 05 eb f8 31 c0 eb 8f 4c 8b a8 a0 01 00 00 48 8b 05 f6 85 3a 00 45 31 e4 48 8b 28 48 81 c5 78 04 00 00 <49> 8b 45 18 48 85 c0 74 05 48 89 ef ff d0 41 83 c4 01 4d 8b 6d 40
[ 706.039042] nmbd[10021]: segfault at 18 ip 00007f9ee8581807 sp 00007ffc1528ce30 error 4 in libc-2.28.so[7f9ee855e000+1c8000]
[ 706.039048] Code: 00 00 00 31 ff 89 d0 0f 05 eb f8 31 c0 eb 8f 4c 8b a8 a0 01 00 00 48 8b 05 f6 85 3a 00 45 31 e4 48 8b 28 48 81 c5 78 04 00 00 <49> 8b 45 18 48 85 c0 74 05 48 89 ef ff d0 41 83 c4 01 4d 8b 6d 40
[ 3154.442379] nfsd: last server has exited, flushing export cache
[ 3154.772220] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 3154.772234] NFSD: starting 90-second grace period (net f0000098)
[ 3213.445359] FS-Cache: Loaded
[ 3213.468021] FS-Cache: Netfs ‘nfs’ registered for caching
[ 3213.482852] NFS: Registering the id_resolver key type
[ 3213.482860] Key type id_resolver registered
[ 3213.482860] Key type id_legacy registered
[ 3213.483253] NFS: bad mount option value specified: minorversion=1
[ 4981.337482] nfsd: last server has exited, flushing export cache
[ 4981.677860] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 4981.677884] NFSD: starting 90-second grace period (net f0000098)
[ 5182.099500] nfsd: last server has exited, flushing export cache
[ 5182.406365] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 5182.406380] NFSD: starting 90-second grace period (net f0000098)
[ 5211.258216] NFS: bad mount option value specified: minorversion=1
[ 5226.545109] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 5226.848607] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 5227.152601] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 5227.456593] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 5227.760539] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 5228.064535] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 5228.368529] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 5228.672537] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 5228.976536] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 7928.289646] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 7928.592717] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 7928.896767] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 7929.200759] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 7929.504760] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 7929.808682] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 7930.112708] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 7930.416757] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 7930.720699] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 7933.416008] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 7933.720675] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 7934.024709] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 7934.364286] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 7934.664768] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 7934.968689] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 7935.272745] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 7935.576689] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[ 7935.880707] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[45441.277118] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[45441.580010] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[45441.883089] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[45442.187023] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[45442.491066] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[45442.795041] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[45443.099107] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[45443.403035] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[45443.707085] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[45540.088036] nfsd: last server has exited, flushing export cache
[45540.441578] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[45540.441594] NFSD: starting 90-second grace period (net f0000098)
[45556.538582] NFS: bad mount option value specified: minorversion=1
[46192.261196] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[46192.563083] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[46192.867102] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[46193.171149] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[46193.475066] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[46193.779350] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[46194.083132] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[46194.387095] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[46194.691124] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[48894.100876] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[48894.403308] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[48894.707349] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[48895.011309] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[48895.316306] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[48895.619262] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[48895.923318] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[48896.227257] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[48896.531245] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[48899.233106] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[48899.539213] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[48899.843261] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[48900.157758] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[48900.459326] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[48900.763303] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[48901.067222] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[48901.372266] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[48901.676233] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[50478.421384] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[50478.723316] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[50479.027391] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[50479.331415] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[50479.635360] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[50479.939358] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[50480.243427] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[50480.547381] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[50480.851412] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[50484.454627] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[50484.755335] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[50485.060360] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[50485.363634] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[50485.667335] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[50485.971335] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[50486.275330] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[50486.579358] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[50486.883426] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[50510.206391] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[50510.207647] ata1.00: ATA-8: TOSHIBA DT01ACA200, MX4OABB0, max UDMA/133
[50510.207654] ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 32), AA
[50510.209372] ata1.00: configured for UDMA/133
[50510.209738] scsi 0:0:0:0: Direct-Access ATA TOSHIBA DT01ACA2 ABB0 PQ: 0 ANSI: 5
[50510.210059] sd 0:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[50510.210061] sd 0:0:0:0: [sdc] 4096-byte physical blocks
[50510.210077] sd 0:0:0:0: [sdc] Write Protect is off
[50510.210079] sd 0:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[50510.210098] sd 0:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
[50510.232760] sdc: sdc1 sdc2
[50510.233056] sd 0:0:0:0: [sdc] Attached SCSI disk
[50520.959503] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[50988.124609] smbd[32536]: segfault at 18 ip 00007fe8fd190807 sp 00007ffee3856ce0 error 4 in libc-2.28.so[7fe8fd16d000+1c8000]
[50988.124615] Code: 00 00 00 31 ff 89 d0 0f 05 eb f8 31 c0 eb 8f 4c 8b a8 a0 01 00 00 48 8b 05 f6 85 3a 00 45 31 e4 48 8b 28 48 81 c5 78 04 00 00 <49> 8b 45 18 48 85 c0 74 05 48 89 ef ff d0 41 83 c4 01 4d 8b 6d 40
[51072.588047] smbd[340]: segfault at 18 ip 00007f8860be7807 sp 00007ffefa4eae20 error 4 in libc-2.28.so[7f8860bc4000+1c8000]
[51072.588054] Code: 00 00 00 31 ff 89 d0 0f 05 eb f8 31 c0 eb 8f 4c 8b a8 a0 01 00 00 48 8b 05 f6 85 3a 00 45 31 e4 48 8b 28 48 81 c5 78 04 00 00 <49> 8b 45 18 48 85 c0 74 05 48 89 ef ff d0 41 83 c4 01 4d 8b 6d 40
[51072.621404] nmbd[344]: segfault at 18 ip 00007fc8f69ff807 sp 00007fff32451b50 error 4 in libc-2.28.so[7fc8f69dc000+1c8000]
[51072.621410] Code: 00 00 00 31 ff 89 d0 0f 05 eb f8 31 c0 eb 8f 4c 8b a8 a0 01 00 00 48 8b 05 f6 85 3a 00 45 31 e4 48 8b 28 48 81 c5 78 04 00 00 <49> 8b 45 18 48 85 c0 74 05 48 89 ef ff d0 41 83 c4 01 4d 8b 6d 40
[51283.147904] smbd[1041]: segfault at 18 ip 00007fa175294807 sp 00007fff603baa80 error 4 in libc-2.28.so[7fa175271000+1c8000]
[51283.147911] Code: 00 00 00 31 ff 89 d0 0f 05 eb f8 31 c0 eb 8f 4c 8b a8 a0 01 00 00 48 8b 05 f6 85 3a 00 45 31 e4 48 8b 28 48 81 c5 78 04 00 00 <49> 8b 45 18 48 85 c0 74 05 48 89 ef ff d0 41 83 c4 01 4d 8b 6d 40
[51283.177604] nmbd[1045]: segfault at 18 ip 00007f4fd243c807 sp 00007ffeaac7d230 error 4 in libc-2.28.so[7f4fd2419000+1c8000]
[51283.177615] Code: 00 00 00 31 ff 89 d0 0f 05 eb f8 31 c0 eb 8f 4c 8b a8 a0 01 00 00 48 8b 05 f6 85 3a 00 45 31 e4 48 8b 28 48 81 c5 78 04 00 00 <49> 8b 45 18 48 85 c0 74 05 48 89 ef ff d0 41 83 c4 01 4d 8b 6d 40
[52153.293546] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[52153.595525] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[52153.899463] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[52154.203458] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[52154.507508] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[52154.811460] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[52155.115517] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[52155.419468] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[52155.723507] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[52473.812522] ata1: SATA link down (SStatus 0 SControl 300)
[52479.233249] ata1: SATA link down (SStatus 0 SControl 300)
[52484.865321] ata1: SATA link down (SStatus 0 SControl 300)
[52484.865334] ata1.00: disabled
[52484.865378] ata1.00: detaching (SCSI 0:0:0:0)
[52484.877550] sd 0:0:0:0: [sdc] Synchronizing SCSI cache
[52484.877588] sd 0:0:0:0: [sdc] Synchronize Cache(10) failed: Result: hostbyte=0x04 driverbyte=0x00
[52484.877589] sd 0:0:0:0: [sdc] Stopping disk
[52484.877596] sd 0:0:0:0: [sdc] Start/Stop Unit failed: Result: hostbyte=0x04 driverbyte=0x00
[54859.914669] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[54860.219600] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[54860.523665] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[54860.826606] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[54860.828687] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[54861.131590] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[54861.435663] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[54861.739679] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[54862.043684] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[54862.347599] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[62998.784650] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[62999.092143] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[62999.396176] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[62999.700133] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[63000.004141] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[63000.308104] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[63000.612152] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[63000.916206] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[63001.220337] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[63004.810039] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[63005.116133] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[63005.420139] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[63005.724082] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[63006.028181] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[63006.332138] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[63006.637109] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[63006.940110] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[63007.244108] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
Peut-être mieux ainsi :
dmesg | grep smbd
[ 41.260075] smbd[5383]: segfault at 18 ip 00007f80e56b9807 sp 00007ffea76ea640 error 4 in libc-2.28.so[7f80e5696000+1c8000]
[ 705.999085] smbd[10016]: segfault at 18 ip 00007f0aa4b4d807 sp 00007ffdee0321d0 error 4 in libc-2.28.so[7f0aa4b2a000+1c8000]
[50988.124609] smbd[32536]: segfault at 18 ip 00007fe8fd190807 sp 00007ffee3856ce0 error 4 in libc-2.28.so[7fe8fd16d000+1c8000]
[51072.588047] smbd[340]: segfault at 18 ip 00007f8860be7807 sp 00007ffefa4eae20 error 4 in libc-2.28.so[7f8860bc4000+1c8000]
[51283.147904] smbd[1041]: segfault at 18 ip 00007fa175294807 sp 00007fff603baa80 error 4 in libc-2.28.so[7fa175271000+1c8000]
dmesg | grep nmbd
[ 41.534475] nmbd[5398]: segfault at 18 ip 00007f6c23a11807 sp 00007ffd8d3b9240 error 4 in libc-2.28.so[7f6c239ee000+1c8000]
[ 706.039042] nmbd[10021]: segfault at 18 ip 00007f9ee8581807 sp 00007ffc1528ce30 error 4 in libc-2.28.so[7f9ee855e000+1c8000]
[51072.621404] nmbd[344]: segfault at 18 ip 00007fc8f69ff807 sp 00007fff32451b50 error 4 in libc-2.28.so[7fc8f69dc000+1c8000]
[51283.177604] nmbd[1045]: segfault at 18 ip 00007f4fd243c807 sp 00007ffeaac7d230 error 4 in libc-2.28.so[7f4fd2419000+1c8000]
J’ai remplacé le fichier libc-2.28.so taille 1,8 Mio (1 897 944) par
libc-2.28.so taille 2,5 Mio (2 581 216) et samba s’est relancé sans erreur pour l’instant.
Je signalerai le sujet résolu si tout rentre dans l’ordre.