Hi Alex et al,
I am using the GUI Installer.
I specified the partition (/dev/sda5) for the root (/) Mount Point with the File System set to ext4 and Format set to Yes.
I specified the partition (/dev/sda6) for the swap Mount Point with the File System set to swap and Format set to No.
Under Advanced Settings I made the following choices.
I checked Use UUID.
I selected Hard disk for the Installation type.
I selected /dev/sda for the Boot disk.
I checked UEFI boot.
I selected BFQ for the I/O scheduler.
When I clicked the Next button the following was displayed above UEFI boot.
MBR is not used with the UEFI bootloader
My Laptop currently has 3 systems on it. One is Windows 8.1 Professional and the other 2 are Manjaro. I am trying to replace one of the Manjaro systems.
Secure Boot is disabled.
GRUB is the bootloader that is being used.
What is wrong with the selections I have made?
Where is the English Installation Guide for the GUI Installer?
I see there is a French guide but it does not mention anything about UEFI in the section named Spécifier les points de montage.
fdisk -l produces the following.
Disk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disklabel type: gpt Disk identifier: 5FEEA573-43E2-4CD6-A7F4-AC5E2FFD7A30 Device Start End Sectors Size Type /dev/sda1 2048 616447 614400 300M Windows recovery environment /dev/sda2 616448 819199 202752 99M EFI System /dev/sda3 819200 1081343 262144 128M Microsoft reserved /dev/sda4 1081344 210796543 209715200 100G Microsoft basic data /dev/sda5 210796544 252739583 41943040 20G Microsoft basic data /dev/sda6 252739584 273711103 20971520 10G Microsoft basic data /dev/sda7 273711104 315654143 41943040 20G Microsoft basic data /dev/sda8 315654144 766541823 450887680 215G Microsoft basic data /dev/sda9 766541824 850427903 83886080 40G Microsoft basic data /dev/sda10 850427904 976766975 126339072 60.2G Microsoft basic data
Also, the installer is extremely slow in operation. My system has a Core i5-3230M CPU with 8GB RAM.
And, the Report a Bug utility doesn’t appear to work when clicking on the Send button.