What choices does this ‘–video’ contain?
When I install c12 0702 , then reboot, when I from grub into initd, my computer monitor display black screen. and can’t boot success.
cpu: intel G630
calculate ~ # lsmod
Module Size Used by
btrfs 569892 0
zlib_deflate 20150 1 btrfs
cryptomgr 2520 0
aead 5571 1 cryptomgr
crc32c 2696 1
libcrc32c 874 1 btrfs
crypto_hash 11516 2 crc32c,libcrc32c
crypto_algapi 11987 3 cryptomgr,aead,crypto_hash
ntfs 189407 0
vfat 9976 0
msdos 6895 0
fat 48257 2 vfat,msdos
jfs 168549 0
xfs 491667 0
exportfs 3306 1 xfs
reiserfs 236511 0
ext3 124152 0
jbd 41660 1 ext3
ext2 62737 0
ext4 275537 1
mbcache 5434 3 ext3,ext2,ext4
jbd2 49203 1 ext4
crc16 1201 1 ext4
ipv6 272192 12
dm_mod 64910 0
snd_hda_codec_realtek 112279 1
snd_hda_intel 23385 0
snd_hda_codec 80298 2 snd_hda_codec_realtek,snd_hda_intel
r8169 47720 0
snd_hwdep 5630 1 snd_hda_codec
iTCO_wdt 12589 0
snd_pcm 68986 2 snd_hda_intel,snd_hda_codec
mii 3803 1 r8169
iTCO_vendor_support 1705 1 iTCO_wdt
i2c_i801 7958 0
snd_timer 17857 1 snd_pcm
snd 54778 6 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
snd_page_alloc 6833 2 snd_hda_intel,snd_pcm
fuse 64266 1
squashfs 24096 1
isofs 31802 1
sg 24052 0
ata_generic 3231 0
pata_acpi 3216 0
eeepc_wmi 2260 0
asus_wmi 14062 1 eeepc_wmi
sparse_keymap 2840 1 asus_wmi
hwmon 1225 1 asus_wmi
rfkill 14823 1 asus_wmi
pci_hotplug 10394 1 asus_wmi
processor 24997 2
wmi 7995 1 asus_wmi
ata_piix 21895 2
i915 353108 1
drm_kms_helper 25426 1 i915
drm 188914 2 i915,drm_kms_helper
intel_agp 10520 1 i915
i2c_algo_bit 5080 1 i915
cfbcopyarea 3089 1 i915
button 4207 1 i915
intel_gtt 14153 3 i915,intel_agp
i2c_core 17922 5 i2c_i801,i915,drm_kms_helper,drm,i2c_algo_bit
video 10919 1 i915
cfbimgblt 2033 1 i915
cfbfillrect 3645 1 i915
LiveCD
video driver on the livecd works?
Alexander Tratsevskiy wrote:
video driver on the livecd works?
yes, livecd works!
after installed, It’s crashed at “Load frame buffer video driver”
my new machine use Intel Pentium G630
http://ark.intel.com/products/53483/Intel-Pentium-Processor-G630-(3M-Cache-2_70-GHz)
old machine use AMD
css-20120702-x86_64.iso
should I use css-20120702-i686.iso ?
yes, livecd works!
after installed, It’s crashed at “Load frame buffer video driver”
Which version you have installed?
old machine use AMD
css-20120702-x86_64.iso
If this is the desktop, it is better to work CLDX i686
You can try to Calculate Linux 12 Beta
http://calculate.mirror.garr.it/mirrors/calculate/CLDX/stages/i686/
I have try:
css-20120702-x86_64.iso
css-11.15-x86_64.iso
livecd boot successful, but when I installed, after reboot, It’s crashed at “Load frame buffer video driver”
I also try:
css-20120705-x86_64.iso
css-20120706-x86_64.iso
when livecd boot, some error occurred。so I CAN’T use.
i686 support 64bit?
I will be able to see on Monday. Try CLS, if you want to build desktops.
calculate ~ # lscpu
Architecture: i686
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 2
On-line CPU(s) list: 0,1
Thread(s) per core: 1
Core(s) per socket: 2
CPU socket(s): 1
Vendor ID: GenuineIntel
CPU family: 6
Model: 42
Stepping: 7
CPU MHz: 2700.000
BogoMIPS: 5386.38
Virtualization: VT-x
L1d cache: 32K
L1i cache: 32K
L2 cache: 256K
L3 cache: 3072K
calculate ~ # grep flags /proc/cpuinfo
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx rdtscp lm constant_tsc arch_perfmon pebs bts xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 popcnt xsave lahf_lm arat epb xsaveopt pln pts dts tpr_shadow vnmi flexpriority ept vpid
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx rdtscp lm constant_tsc arch_perfmon pebs bts xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 popcnt xsave lahf_lm arat epb xsaveopt pln pts dts tpr_shadow vnmi flexpriority ept vpid
Now, I test use pre verison, css-11.12-i686.iso
i686 system, it’s 32bit, I installed the memory only 3G, not 4G.
My machine is a server, not for desktop. so I need x86_64.
I test css-11.12-i686.iso, it’s success.
I test css-11.12-x86_64.iso, same problem, (Installed OK, but reboot after grub and enter into boot failed)
why? My CPU: Intel Pentium G630
http://ark.intel.com/products/53483/Intel-Pentium-Processor-G630-(3M-Cache-2_70-GHz)
Instruction Set: 64-bit
another, I installed css-11.12-i686.iso, I only can install 32bit soft, for example uwsgi, tell me ~x86, not ~amd64. and “top” command view memory only 3G, my real memory is 4G. so i686 is 32bit.
why I boot livecd(x86_64) success? but after installed boot system failed?
my server hardwares like this:
Intel® Pentium® G630 Processor, 2.70GHz, 3MB Cache, 2C/2T, 65W [Included in Price]
4GB Memory (2x2GB) 1333MHz Single Rank UDIMMs for 1 Processor [Included in Price]
500GB 3.5-inch 7.2K RPM SATA II Hard Drive - Non Hotplug
Why css-20120702 x86_64 livecd boot success, but when I installed CAN’T boot success?
i686 is a 32-bit build and x86_64 is naitive 64-bit
so ,It’s x86_64, not i686, but after install x86_64, it’s boot failed.
If your CPU has x86_64 support then either i686 or x86_64 Linux will work. If your CPU lacks x86_64 support then only i686 will work. ___mikelangelo11
some stuff:
https://wiki.archlinux.org/index.php/Intel#KMS_.28Kernel_Mode_Setting.29
https://wiki.archlinux.org/index.php/Intel#X_freeze.2Fcrash_with_intel_driver
pls pls pls
Same Machine, I install CentOS6.2-x86_64.iso, everything are OK
Calculate Linux wrote:
I test css-11.12-i686.iso, it’s success.
I test css-11.12-x86_64.iso, same problem, (Installed OK, but reboot after grub and enter into boot failed)
why? My CPU: Intel Pentium G630
http://ark.intel.com/products/53483/Intel-Pentium-Processor-G630-(3M-Cache-2_70-GHz)
Instruction Set: 64-bitanother, I installed css-11.12-i686.iso, I only can install 32bit soft, for example uwsgi, tell me ~x86, not ~amd64. and “top” command view memory only 3G, my real memory is 4G. so i686 is 32bit.
why I boot livecd(x86_64) success? but after installed boot system failed?
I too testing css-11.12-x86_64.iso. after installation, the system is too not load. But after second restart, system is loading. You can check the system is booted after the second reboot?
I used css-20120706-x86_64.iso