black screen after boot

Discussions & Opinions
1

Hi,

i now dowloaded version 10.4. After boot from DVD i get only black screen. I trying all i menu.

I have notebook DELL LATITUDE E6510.

I trying also boot with iommu=off, but this also not vorking.

Thanks
Milan

2

What has notebook resolution?
Try press Alt+F1 after boot. May be xorg-server failed to start.
Try remove option

video=uvesafb:ywrap,1024x768-32@60,mtrr:3,   splash=silent,theme:tty1

and place

splash=off

Is NumLock Led blinking which you has black screen.

3

i trying but not working.

output lspci:

00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:16.3 Serial controller: Intel Corporation 5 Series/3400 Series Chipset KT Controller (rev 06)
00:19.0 Ethernet controller: Intel Corporation 82577LM Gigabit Network Connection (rev 05)
00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05)
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05)
00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 05)
00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 05)
00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5)
00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05)
02:00.0 Network controller: Intel Corporation Centrino Advanced-N 6200 (rev 35)
03:00.0 CardBus bridge: Ricoh Co Ltd Device e476 (rev 02)
03:00.1 SD Host controller: Ricoh Co Ltd Device e822 (rev 03)
03:00.4 FireWire (IEEE 1394): Ricoh Co Ltd Device e832 (rev 03)
3f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)
3f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)
3f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
3f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02)
3f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
3f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
4

What architecture of distribute did you download? (i686 or x86_64)

5

i have x86_64 ver. 10.4

(noteboot DELL E6510)

after remove option:
video=uvesafb:ywrap,1024x768-32@60,mtrr:3, splash=silent,theme:tty1

a choose in menu without X ( i dont know now exact) but i see firt boot msg and after again is black screen.

display is:
Hardware Class: monitor
Model: “6T31C 156KT LCD Monitor”
Vendor: SEC “6T31C 156KT”
Device: eisa 0x544b
Resolution: 1600x900@60Hz
Size: 344x194 mm
Detailed Timings #0:
Resolution: 1600x900
Horizontal: 1600 1648 1680 1932 (+48 +80 +332) -hsync
Vertical: 900 902 907 930 (+2 +7 +30) +vsync
Frequencies: 71.87 MHz, 37.20 kHz, 40.00 Hz
Detailed Timings #1:
Resolution: 1600x900
Horizontal: 1600 1648 1680 1932 (+48 +80 +332) -hsync
Vertical: 900 902 907 930 (+2 +7 +30) +vsync
Frequencies: 107.80 MHz, 55.80 kHz, 60.00 Hz
Config Status: cfg=new, avail=yes, need=no, active=unknown