[ 12.173] X.Org X Server 1.16.4 Release Date: 2014-12-20 [ 12.173] X Protocol Version 11, Revision 0 [ 12.173] Build Operating System: Linux 3.18.11-calculate x86_64 Gentoo [ 12.173] Current Operating System: Linux syuk 3.18.14-calculate #1 SMP PREEMPT Sun May 31 09:48:38 UTC 2015 x86_64 [ 12.173] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.18.14-calculate root=UUID=67875012-9111-471d-9ec5-d6da95426f25 ro zswap.enabled=1 zswap.compressor=lz4 zswap.max_pool_percent=30 video=800x600 real_resume=UUID=397a573b-3416-4752-adba-f2eea8810780 elevator=bfq calculate=video:fglrx splash=silent,theme:calculate console=tty1 quiet [ 12.173] Build Date: 22 May 2015 06:51:20AM [ 12.173] [ 12.173] Current version of pixman: 0.32.6 [ 12.173] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 12.173] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 12.173] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jul 24 16:44:42 2015 [ 12.198] (==) Using config file: "/etc/X11/xorg.conf" [ 12.198] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 12.198] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 12.227] (==) ServerLayout "Xorg Configured" [ 12.227] (**) |-->Screen "Monitor" (0) [ 12.227] (**) | |-->Monitor "StandardMonitor" [ 12.228] (**) | |-->Device "fglrxVGA" [ 12.229] (==) Automatically adding devices [ 12.229] (==) Automatically enabling devices [ 12.229] (==) Automatically adding GPU devices [ 12.261] (WW) The directory "/usr/share/fonts/TTF/" does not exist. [ 12.261] Entry deleted from font path. [ 12.261] (WW) The directory "/usr/share/fonts/OTF/" does not exist. [ 12.261] Entry deleted from font path. [ 12.261] (WW) The directory "/usr/share/fonts/Type1/" does not exist. [ 12.261] Entry deleted from font path. [ 12.262] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/". [ 12.262] Entry deleted from font path. [ 12.262] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/"). [ 12.262] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/". [ 12.263] Entry deleted from font path. [ 12.263] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/"). [ 12.263] (**) FontPath set to: /usr/share/fonts/corefonts, /usr/share/fonts/misc, /usr/share/fonts/droid, /usr/share/fonts/misc/ [ 12.263] (==) ModulePath set to "/usr/lib64/xorg/modules" [ 12.263] (**) Extension "RENDER" is enabled [ 12.263] (**) Extension "XVideo" is enabled [ 12.263] (**) Extension "Composite" is enabled [ 12.263] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 12.264] (II) Loader magic: 0x808c80 [ 12.264] (II) Module ABI versions: [ 12.264] X.Org ANSI C Emulation: 0.4 [ 12.264] X.Org Video Driver: 18.0 [ 12.264] X.Org XInput driver : 21.0 [ 12.264] X.Org Server Extension : 8.0 [ 12.266] (--) PCI:*(0:0:1:0) 1002:9901:1458:d000 rev 0, Mem @ 0xc0000000/268435456, 0xfeb00000/262144, I/O @ 0x0000f000/256 [ 12.266] (II) "glx" will be loaded. This was enabled by default and also specified in the config file. [ 12.266] (II) LoadModule: "dri" [ 12.266] (II) Module "dri" already built-in [ 12.266] (II) LoadModule: "dbe" [ 12.266] (II) Module "dbe" already built-in [ 12.266] (II) LoadModule: "glx" [ 12.321] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so [ 12.336] (II) Module glx: vendor="Advanced Micro Devices, Inc." [ 12.336] compiled for 6.9.0, module version = 1.0.0 [ 12.336] (II) LoadModule: "extmod" [ 12.336] (II) Module "extmod" already built-in [ 12.336] (II) LoadModule: "fglrx" [ 12.337] (II) Loading /usr/lib64/xorg/modules/drivers/fglrx_drv.so [ 12.856] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc." [ 12.856] compiled for 1.4.99.906, module version = 15.20.2 [ 12.856] Module class: X.Org Video Driver [ 12.857] (II) Loading sub module "fglrxdrm" [ 12.857] (II) LoadModule: "fglrxdrm" [ 12.857] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so [ 12.883] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc." [ 12.883] compiled for 1.4.99.906, module version = 15.20.2 [ 12.883] (II) AMD Proprietary Linux Driver Version Identifier:15.20.2 [ 12.883] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-15.20.1013 [ 12.883] (II) AMD Proprietary Linux Driver Build Date: Feb 27 2015 03:27:32 [ 12.883] (++) using VT number 7 [ 12.886] (WW) Falling back to old probe method for fglrx [ 12.963] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default [ 12.971] ukiDynamicMajor: found major device number 249 [ 12.984] (--) Assigning device section with no busID to primary device [ 12.984] (--) Chipset Supported AMD Graphics Processor (0x9901) found [ 12.995] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:1:1) found [ 13.005] (II) fglrx(0): pEnt->device->identifier=0xf44aa0 [ 13.005] (II) fglrx(0): === [xdl_xs116_atiddxPreInit] === begin [ 13.005] (II) fglrx(0): FB driver is enabled [ 13.006] (II) Loading sub module "vgahw" [ 13.006] (II) LoadModule: "vgahw" [ 13.024] (II) Loading /usr/lib64/xorg/modules/libvgahw.so [ 13.030] (II) Module vgahw: vendor="X.Org Foundation" [ 13.030] compiled for 1.16.4, module version = 0.1.0 [ 13.030] ABI class: X.Org Video Driver, version 18.0 [ 13.030] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32 [ 13.031] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) [ 13.031] (==) fglrx(0): Default visual is TrueColor [ 13.031] (**) fglrx(0): Option "TexturedVideo" "on" [ 13.031] (**) fglrx(0): Option "DPMS" [ 13.031] (==) fglrx(0): RGB weight 888 [ 13.031] (II) fglrx(0): Using 8 bits per RGB [ 13.031] (==) fglrx(0): Buffer Tiling is ON [ 13.032] (II) Loading sub module "fglrxdrm" [ 13.032] (II) LoadModule: "fglrxdrm" [ 13.032] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so [ 13.032] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc." [ 13.032] compiled for 1.4.99.906, module version = 15.20.2 [ 13.034] ukiDynamicMajor: found major device number 249 [ 13.035] ukiDynamicMajor: found major device number 249 [ 13.035] ukiOpenByBusid: Searching for BusID PCI:0:1:0 [ 13.035] ukiOpenDevice: node name is /dev/ati/card0 [ 13.035] ukiOpenDevice: open result is 11, (OK) [ 18.199] ukiOpenByBusid: ukiOpenMinor returns 11 [ 18.199] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0 [ 18.200] (**) fglrx(0): NoAccel = NO [ 18.200] (**) fglrx(0): AMD 2D Acceleration Architecture enabled [ 18.200] (--) fglrx(0): Chipset: "AMD Radeon HD 7660D" (Chipset = 0x9901) [ 18.200] (--) fglrx(0): (PciSubVendor = 0x1458, PciSubDevice = 0xd000) [ 18.200] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD [ 18.200] (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000 [ 18.200] (--) fglrx(0): MMIO registers at 0xfeb00000 [ 18.200] (--) fglrx(0): I/O port at 0x0000f000 [ 18.200] (==) fglrx(0): ROM-BIOS at 0x000c0000 [ 18.384] (II) fglrx(0): AC Adapter is used [ 19.074] (II) fglrx(0): AMD Video BIOS revision 9 or later detected [ 19.074] (--) fglrx(0): Video RAM: 524288 kByte, Type: DDR3 [ 19.074] (II) fglrx(0): PCIE card detected [ 19.074] (--) fglrx(0): Using per-process page tables (PPPT) as GART. [ 19.074] (WW) fglrx(0): board is an unknown third party board, chipset is supported [ 19.074] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000) [ 19.074] (II) fglrx(0): RandR 1.2 support is enabled! [ 19.074] (II) fglrx(0): RandR 1.2 rotation support is enabled! [ 19.075] (II) Loading sub module "fb" [ 19.075] (II) LoadModule: "fb" [ 19.075] (II) Loading /usr/lib64/xorg/modules/libfb.so [ 20.271] (II) Module fb: vendor="X.Org Foundation" [ 20.271] compiled for 1.16.4, module version = 1.0.0 [ 20.271] ABI class: X.Org ANSI C Emulation, version 0.4 [ 20.271] (II) fglrx(0): EDID Management option: EDID Management is enabled [ 20.271] (II) Loading sub module "ddc" [ 20.271] (II) LoadModule: "ddc" [ 20.271] (II) Module "ddc" already built-in [ 20.779] (II) fglrx(0): Output LVDS using monitor section StandardMonitor [ 20.779] (II) fglrx(0): Output DFP1 has no monitor section [ 20.779] (II) fglrx(0): Output DFP2 has no monitor section [ 20.779] (II) fglrx(0): Output DFP3 has no monitor section [ 20.779] (II) fglrx(0): Output DFP4 has no monitor section [ 20.779] (II) fglrx(0): Output DFP5 has no monitor section [ 20.779] (II) fglrx(0): Output CRT1 has no monitor section [ 20.779] (II) Loading sub module "ddc" [ 20.779] (II) LoadModule: "ddc" [ 20.779] (II) Module "ddc" already built-in [ 20.780] (WW) fglrx(0): Failed to get EDID by ACPI [ 20.780] (II) fglrx(0): Connected Display0: LVDS [ 20.780] (II) fglrx(0): Display0 EDID data --------------------------- [ 20.780] (II) fglrx(0): Manufacturer: GBT Model: 2105 Serial#: 305419896 [ 20.780] (II) fglrx(0): Year: 2011 Week: 40 [ 20.780] (II) fglrx(0): EDID Version: 1.3 [ 20.780] (II) fglrx(0): Digital Display Input [ 20.780] (II) fglrx(0): DFP 1.x compatible TMDS [ 20.780] (II) fglrx(0): Max Image Size [cm]: horiz.: 47 vert.: 29 [ 20.780] (II) fglrx(0): Gamma: 2.20 [ 20.780] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off [ 20.780] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 20.780] (II) fglrx(0): First detailed timing is preferred mode [ 20.780] (II) fglrx(0): redX: 0.669 redY: 0.322 greenX: 0.220 greenY: 0.668 [ 20.780] (II) fglrx(0): blueX: 0.146 blueY: 0.077 whiteX: 0.313 whiteY: 0.329 [ 20.780] (II) fglrx(0): Manufacturer's mask: 0 [ 20.780] (II) fglrx(0): Supported detailed timing: [ 20.780] (II) fglrx(0): clock: 148.5 MHz Image Size: 473 x 296 mm [ 20.780] (II) fglrx(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0 [ 20.780] (II) fglrx(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0 [ 20.780] (II) fglrx(0): Monitor name: 21.5" AIO PC [ 20.780] (II) fglrx(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 165 MHz [ 20.780] (II) fglrx(0): EDID (in hex): [ 20.780] (II) fglrx(0): 00ffffffffffff001c54052178563412 [ 20.780] (II) fglrx(0): 28150103852f1d78ea64b5ab5238ab25 [ 20.780] (II) fglrx(0): 13505400000001010101010101010101 [ 20.780] (II) fglrx(0): 010101010101023a801871382d40582c [ 20.780] (II) fglrx(0): 4500d9281100001c0000001000382d40 [ 20.780] (II) fglrx(0): 582c4500d9281100001c000000fc0032 [ 20.780] (II) fglrx(0): 312e35222041494f2050430a000000fd [ 20.780] (II) fglrx(0): 00384c1e5310000a2020202020200010 [ 20.780] (II) fglrx(0): End of Display0 EDID data -------------------- [ 20.780] (II) fglrx(0): Dynamic Surface Resizing Enabled [ 20.781] (WW) fglrx(0): Failed to get EDID by ACPI [ 20.781] (II) fglrx(0): EDID for output LVDS [ 20.781] (II) fglrx(0): Manufacturer: GBT Model: 2105 Serial#: 305419896 [ 20.781] (II) fglrx(0): Year: 2011 Week: 40 [ 20.781] (II) fglrx(0): EDID Version: 1.3 [ 20.781] (II) fglrx(0): Digital Display Input [ 20.781] (II) fglrx(0): DFP 1.x compatible TMDS [ 20.781] (II) fglrx(0): Max Image Size [cm]: horiz.: 47 vert.: 29 [ 20.781] (II) fglrx(0): Gamma: 2.20 [ 20.781] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off [ 20.781] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 20.781] (II) fglrx(0): First detailed timing is preferred mode [ 20.781] (II) fglrx(0): redX: 0.669 redY: 0.322 greenX: 0.220 greenY: 0.668 [ 20.781] (II) fglrx(0): blueX: 0.146 blueY: 0.077 whiteX: 0.313 whiteY: 0.329 [ 20.781] (II) fglrx(0): Manufacturer's mask: 0 [ 20.781] (II) fglrx(0): Supported detailed timing: [ 20.781] (II) fglrx(0): clock: 148.5 MHz Image Size: 473 x 296 mm [ 20.781] (II) fglrx(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0 [ 20.781] (II) fglrx(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0 [ 20.781] (II) fglrx(0): Monitor name: 21.5" AIO PC [ 20.781] (II) fglrx(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 165 MHz [ 20.781] (II) fglrx(0): EDID (in hex): [ 20.781] (II) fglrx(0): 00ffffffffffff001c54052178563412 [ 20.781] (II) fglrx(0): 28150103852f1d78ea64b5ab5238ab25 [ 20.781] (II) fglrx(0): 13505400000001010101010101010101 [ 20.781] (II) fglrx(0): 010101010101023a801871382d40582c [ 20.781] (II) fglrx(0): 4500d9281100001c0000001000382d40 [ 20.781] (II) fglrx(0): 582c4500d9281100001c000000fc0032 [ 20.781] (II) fglrx(0): 312e35222041494f2050430a000000fd [ 20.781] (II) fglrx(0): 00384c1e5310000a2020202020200010 [ 20.781] (II) fglrx(0): EDID vendor "GBT", prod id 8453 [ 20.781] (II) fglrx(0): Using EDID range info for horizontal sync [ 20.781] (II) fglrx(0): Using EDID range info for vertical refresh [ 20.781] (II) fglrx(0): Printing DDC gathered Modelines: [ 20.781] (II) fglrx(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 -hsync +vsync (67.5 kHz eP) [ 20.781] (II) fglrx(0): Printing probed modes for output LVDS [ 20.781] (II) fglrx(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 -hsync +vsync (67.5 kHz UeP) [ 20.781] (II) fglrx(0): Modeline "1680x1050"x60.0 148.50 1680 2008 2052 2200 1050 1084 1089 1125 -hsync +vsync (67.5 kHz e) [ 20.781] (II) fglrx(0): Modeline "1600x1024"x60.0 148.50 1600 2008 2052 2200 1024 1084 1089 1125 -hsync +vsync (67.5 kHz e) [ 20.781] (II) fglrx(0): Modeline "1400x1050"x60.0 148.50 1400 2008 2052 2200 1050 1084 1089 1125 -hsync +vsync (67.5 kHz e) [ 20.781] (II) fglrx(0): Modeline "1600x900"x60.0 148.50 1600 2008 2052 2200 900 1084 1089 1125 -hsync +vsync (67.5 kHz e) [ 20.781] (II) fglrx(0): Modeline "1360x1024"x60.0 148.50 1360 2008 2052 2200 1024 1084 1089 1125 -hsync +vsync (67.5 kHz e) [ 20.781] (II) fglrx(0): Modeline "1280x1024"x60.0 148.50 1280 2008 2052 2200 1024 1084 1089 1125 -hsync +vsync (67.5 kHz e) [ 20.781] (II) fglrx(0): Modeline "1440x900"x60.0 148.50 1440 2008 2052 2200 900 1084 1089 1125 -hsync +vsync (67.5 kHz e) [ 20.781] (II) fglrx(0): Modeline "1280x960"x60.0 148.50 1280 2008 2052 2200 960 1084 1089 1125 -hsync +vsync (67.5 kHz e) [ 20.781] (II) fglrx(0): Modeline "1280x900"x60.0 148.50 1280 2008 2052 2200 900 1084 1089 1125 -hsync +vsync (67.5 kHz e) [ 20.781] (II) fglrx(0): Modeline "1360x768"x60.0 148.50 1360 2008 2052 2200 768 1084 1089 1125 -hsync +vsync (67.5 kHz e) [ 20.781] (II) fglrx(0): Modeline "1280x800"x60.0 148.50 1280 2008 2052 2200 800 1084 1089 1125 -hsync +vsync (67.5 kHz e) [ 20.781] (II) fglrx(0): Modeline "1280x768"x60.0 148.50 1280 2008 2052 2200 768 1084 1089 1125 -hsync +vsync (67.5 kHz e) [ 20.781] (II) fglrx(0): Modeline "1280x720"x60.0 148.50 1280 2008 2052 2200 720 1084 1089 1125 -hsync +vsync (67.5 kHz e) [ 20.781] (II) fglrx(0): Modeline "1024x768"x60.0 148.50 1024 2008 2052 2200 768 1084 1089 1125 -hsync +vsync (67.5 kHz e) [ 20.781] (II) fglrx(0): Modeline "1024x600"x60.0 148.50 1024 2008 2052 2200 600 1084 1089 1125 -hsync +vsync (67.5 kHz e) [ 20.781] (II) fglrx(0): Modeline "800x600"x60.0 148.50 800 2008 2052 2200 600 1084 1089 1125 -hsync +vsync (67.5 kHz e) [ 20.781] (II) fglrx(0): Modeline "720x576"x60.0 148.50 720 2008 2052 2200 576 1084 1089 1125 -hsync +vsync (67.5 kHz e) [ 20.781] (II) fglrx(0): Modeline "848x480"x60.0 148.50 848 2008 2052 2200 480 1084 1089 1125 -hsync +vsync (67.5 kHz e) [ 20.781] (II) fglrx(0): Modeline "800x480"x60.0 148.50 800 2008 2052 2200 480 1084 1089 1125 -hsync +vsync (67.5 kHz e) [ 20.781] (II) fglrx(0): Modeline "720x480"x60.0 148.50 720 2008 2052 2200 480 1084 1089 1125 -hsync +vsync (67.5 kHz e) [ 20.781] (II) fglrx(0): Modeline "640x480"x60.0 148.50 640 2008 2052 2200 480 1084 1089 1125 -hsync +vsync (67.5 kHz e) [ 20.781] (II) fglrx(0): EDID for output DFP1 [ 20.781] (II) fglrx(0): EDID for output DFP2 [ 20.781] (II) fglrx(0): EDID for output DFP3 [ 20.781] (II) fglrx(0): EDID for output DFP4 [ 20.781] (II) fglrx(0): EDID for output DFP5 [ 20.781] (II) fglrx(0): EDID for output CRT1 [ 20.781] (II) fglrx(0): Output LVDS connected [ 20.781] (II) fglrx(0): Output DFP1 disconnected [ 20.781] (II) fglrx(0): Output DFP2 disconnected [ 20.781] (II) fglrx(0): Output DFP3 disconnected [ 20.781] (II) fglrx(0): Output DFP4 disconnected [ 20.781] (II) fglrx(0): Output DFP5 disconnected [ 20.781] (II) fglrx(0): Output CRT1 disconnected [ 20.781] (II) fglrx(0): Using user preference for initial modes [ 20.781] (II) fglrx(0): Output LVDS using initial mode 1920x1080 [ 20.781] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 20.782] (II) fglrx(0): Display dimensions: (470, 290) mm [ 20.782] (II) fglrx(0): DPI set to (103, 94) [ 20.782] (II) fglrx(0): Eyefinity capable adapter detected. [ 20.782] (II) fglrx(0): Adapter AMD Radeon HD 7660D has 4 configurable heads and 1 displays connected. [ 20.782] (==) fglrx(0): PseudoColor visuals disabled [ 20.782] (II) Loading sub module "ramdac" [ 20.782] (II) LoadModule: "ramdac" [ 20.782] (II) Module "ramdac" already built-in [ 20.782] (==) fglrx(0): NoDRI = NO [ 20.782] (==) fglrx(0): Capabilities: 0x00000000 [ 20.782] (==) fglrx(0): CapabilitiesEx: 0x00000000 [ 20.782] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so" [ 20.782] (==) fglrx(0): UseFastTLS=0 [ 20.782] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled [ 20.782] (--) Depth 24 pixmap format is 32 bpp [ 20.782] (II) fglrx(0): doing swlDriScreenInit [ 20.782] (II) fglrx(0): swlDriScreenInit for fglrx driver [ 20.782] ukiDynamicMajor: found major device number 249 [ 20.782] ukiDynamicMajor: found major device number 249 [ 20.782] ukiDynamicMajor: found major device number 249 [ 20.782] ukiOpenByBusid: Searching for BusID PCI:0:1:0 [ 20.782] ukiOpenDevice: node name is /dev/ati/card0 [ 20.782] ukiOpenDevice: open result is 12, (OK) [ 20.782] ukiOpenByBusid: ukiOpenMinor returns 12 [ 20.782] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0 [ 20.782] (II) fglrx(0): [uki] DRM interface version 1.0 [ 20.782] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:0:1:0" [ 20.782] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000 [ 20.782] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f054a8c2000 [ 20.782] (II) fglrx(0): [uki] framebuffer handle = 0x3000 [ 20.782] (II) fglrx(0): [uki] added 1 reserved context for kernel [ 20.782] (II) fglrx(0): swlDriScreenInit done [ 20.782] (II) fglrx(0): Kernel Module Version Information: [ 20.782] (II) fglrx(0): Name: fglrx [ 20.782] (II) fglrx(0): Version: 15.20.2 [ 20.782] (II) fglrx(0): Date: Feb 27 2015 [ 20.782] (II) fglrx(0): Desc: AMD FireGL DRM kernel module [ 20.782] (II) fglrx(0): Kernel Module version matches driver. [ 20.782] (II) fglrx(0): Kernel Module Build Time Information: [ 20.782] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.18.14-calculate [ 20.782] (II) fglrx(0): Build-Kernel MODVERSIONS: no [ 20.782] (II) fglrx(0): Build-Kernel __SMP__: yes [ 20.782] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000 [ 20.782] (II) fglrx(0): [uki] register handle = 0x00004000 [ 20.792] (II) fglrx(0): DRI initialization successfull [ 20.810] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x010e0000 [ 20.832] (==) fglrx(0): Backing store enabled [ 20.833] (**) fglrx(0): DPMS enabled [ 20.833] (II) fglrx(0): Initialized in-driver Xinerama extension [ 20.833] (**) fglrx(0): Textured Video is enabled. [ 20.833] (II) LoadModule: "glesx" [ 20.833] (II) Loading /usr/lib64/xorg/modules/glesx.so [ 20.943] (II) Module glesx: vendor="X.Org Foundation" [ 20.943] compiled for 1.4.99.906, module version = 1.0.0 [ 20.943] (II) fglrx(0): GLESX enableFlags = 8784 [ 20.950] (II) fglrx(0): GLESX is enabled [ 20.950] (II) LoadModule: "amdxmm" [ 20.950] (II) Loading /usr/lib64/xorg/modules/amdxmm.so [ 20.961] (II) Module amdxmm: vendor="X.Org Foundation" [ 20.961] compiled for 1.4.99.906, module version = 2.0.0 [ 21.016] (II) fglrx(0): UVD feature is enabled(II) fglrx(0): [ 21.026] (II) fglrx(0): Enable composite support successfully [ 21.026] (WW) fglrx(0): Option "XAANoOffscreenPixmaps" is not used [ 21.026] (WW) fglrx(0): Option "AllowGLXWithComposite" is not used [ 21.026] (WW) fglrx(0): Option "RenderAccel" is not used [ 21.026] (WW) fglrx(0): Option "AddARGBGLXVisuals" is not used [ 21.026] (WW) fglrx(0): Option "TripleBuffer" is not used [ 21.026] (WW) fglrx(0): Option "UseFBDev" is not used [ 21.026] (WW) fglrx(0): Option "VideoOverlay" is not used [ 21.026] (II) fglrx(0): X context handle = 0x1 [ 21.026] (II) fglrx(0): [DRI] installation complete [ 21.026] (==) fglrx(0): Silken mouse enabled [ 21.028] (==) fglrx(0): Using HW cursor of display infrastructure! [ 21.028] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 21.028] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel' [ 22.157] (--) RandR disabled [ 22.177] ukiDynamicMajor: found major device number 249 [ 22.177] ukiDynamicMajor: found major device number 249 [ 22.177] ukiOpenByBusid: Searching for BusID PCI:0:1:0 [ 22.177] ukiOpenDevice: node name is /dev/ati/card0 [ 22.177] ukiOpenDevice: open result is 13, (OK) [ 22.177] ukiOpenByBusid: ukiOpenMinor returns 13 [ 22.177] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0 [ 22.177] (EE) AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory] [ 22.260] ukiDynamicMajor: found major device number 249 [ 22.260] ukiDynamicMajor: found major device number 249 [ 22.260] ukiDynamicMajor: found major device number 249 [ 22.260] ukiOpenDevice: node name is /dev/ati/card0 [ 22.260] ukiOpenDevice: open result is 14, (OK) [ 22.260] ukiGetBusid returned 'PCI:0:1:0' [ 22.260] ukiOpenDevice: node name is /dev/ati/card1 [ 22.260] ukiOpenDevice: open result is -1, (No such device) [ 22.260] ukiOpenDevice: open result is -1, (No such device) [ 22.260] ukiOpenDevice: Open failed [ 22.260] ukiOpenDevice: node name is /dev/ati/card2 [ 22.260] ukiOpenDevice: open result is -1, (No such device) [ 22.260] ukiOpenDevice: open result is -1, (No such device) [ 22.260] ukiOpenDevice: Open failed [ 22.260] ukiOpenDevice: node name is /dev/ati/card3 [ 22.260] ukiOpenDevice: open result is -1, (No such device) [ 22.260] ukiOpenDevice: open result is -1, (No such device) [ 22.260] ukiOpenDevice: Open failed [ 22.261] ukiOpenDevice: node name is /dev/ati/card4 [ 22.261] ukiOpenDevice: open result is -1, (No such device) [ 22.261] ukiOpenDevice: open result is -1, (No such device) [ 22.261] ukiOpenDevice: Open failed [ 22.261] ukiOpenDevice: node name is /dev/ati/card5 [ 22.261] ukiOpenDevice: open result is -1, (No such device) [ 22.261] ukiOpenDevice: open result is -1, (No such device) [ 22.261] ukiOpenDevice: Open failed [ 22.261] ukiOpenDevice: node name is /dev/ati/card6 [ 22.261] ukiOpenDevice: open result is -1, (No such device) [ 22.261] ukiOpenDevice: open result is -1, (No such device) [ 22.261] ukiOpenDevice: Open failed [ 22.261] ukiOpenDevice: node name is /dev/ati/card7 [ 22.261] ukiOpenDevice: open result is -1, (No such device) [ 22.261] ukiOpenDevice: open result is -1, (No such device) [ 22.261] ukiOpenDevice: Open failed [ 22.261] ukiOpenDevice: node name is /dev/ati/card8 [ 22.261] ukiOpenDevice: open result is -1, (No such device) [ 22.261] ukiOpenDevice: open result is -1, (No such device) [ 22.261] ukiOpenDevice: Open failed [ 22.261] ukiOpenDevice: node name is /dev/ati/card9 [ 22.261] ukiOpenDevice: open result is -1, (No such device) [ 22.261] ukiOpenDevice: open result is -1, (No such device) [ 22.261] ukiOpenDevice: Open failed [ 22.261] ukiOpenDevice: node name is /dev/ati/card10 [ 22.261] ukiOpenDevice: open result is -1, (No such device) [ 22.261] ukiOpenDevice: open result is -1, (No such device) [ 22.261] ukiOpenDevice: Open failed [ 22.261] ukiOpenDevice: node name is /dev/ati/card11 [ 22.261] ukiOpenDevice: open result is -1, (No such device) [ 22.261] ukiOpenDevice: open result is -1, (No such device) [ 22.261] ukiOpenDevice: Open failed [ 22.261] ukiOpenDevice: node name is /dev/ati/card12 [ 22.261] ukiOpenDevice: open result is -1, (No such device) [ 22.261] ukiOpenDevice: open result is -1, (No such device) [ 22.261] ukiOpenDevice: Open failed [ 22.261] ukiOpenDevice: node name is /dev/ati/card13 [ 22.261] ukiOpenDevice: open result is -1, (No such device) [ 22.261] ukiOpenDevice: open result is -1, (No such device) [ 22.261] ukiOpenDevice: Open failed [ 22.261] ukiOpenDevice: node name is /dev/ati/card14 [ 22.261] ukiOpenDevice: open result is -1, (No such device) [ 22.261] ukiOpenDevice: open result is -1, (No such device) [ 22.261] ukiOpenDevice: Open failed [ 22.261] ukiOpenDevice: node name is /dev/ati/card15 [ 22.261] ukiOpenDevice: open result is -1, (No such device) [ 22.261] ukiOpenDevice: open result is -1, (No such device) [ 22.261] ukiOpenDevice: Open failed [ 22.261] ukiDynamicMajor: found major device number 249 [ 22.261] ukiOpenByBusid: Searching for BusID PCI:0:1:0 [ 22.261] ukiOpenDevice: node name is /dev/ati/card0 [ 22.261] ukiOpenDevice: open result is 14, (OK) [ 22.261] ukiOpenByBusid: ukiOpenMinor returns 14 [ 22.262] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0 [ 22.688] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0 [ 22.689] ukiDynamicMajor: found major device number 249 [ 22.689] ukiDynamicMajor: found major device number 249 [ 22.689] ukiDynamicMajor: found major device number 249 [ 22.689] ukiOpenDevice: node name is /dev/ati/card0 [ 22.689] ukiOpenDevice: open result is 15, (OK) [ 22.689] ukiGetBusid returned 'PCI:0:1:0' [ 22.689] ukiOpenDevice: node name is /dev/ati/card1 [ 22.689] ukiOpenDevice: open result is -1, (No such device) [ 22.689] ukiOpenDevice: open result is -1, (No such device) [ 22.689] ukiOpenDevice: Open failed [ 22.689] ukiOpenDevice: node name is /dev/ati/card2 [ 22.689] ukiOpenDevice: open result is -1, (No such device) [ 22.689] ukiOpenDevice: open result is -1, (No such device) [ 22.689] ukiOpenDevice: Open failed [ 22.689] ukiOpenDevice: node name is /dev/ati/card3 [ 22.689] ukiOpenDevice: open result is -1, (No such device) [ 22.689] ukiOpenDevice: open result is -1, (No such device) [ 22.689] ukiOpenDevice: Open failed [ 22.689] ukiOpenDevice: node name is /dev/ati/card4 [ 22.689] ukiOpenDevice: open result is -1, (No such device) [ 22.689] ukiOpenDevice: open result is -1, (No such device) [ 22.689] ukiOpenDevice: Open failed [ 22.689] ukiOpenDevice: node name is /dev/ati/card5 [ 22.689] ukiOpenDevice: open result is -1, (No such device) [ 22.689] ukiOpenDevice: open result is -1, (No such device) [ 22.689] ukiOpenDevice: Open failed [ 22.689] ukiOpenDevice: node name is /dev/ati/card6 [ 22.689] ukiOpenDevice: open result is -1, (No such device) [ 22.690] ukiOpenDevice: open result is -1, (No such device) [ 22.690] ukiOpenDevice: Open failed [ 22.690] ukiOpenDevice: node name is /dev/ati/card7 [ 22.690] ukiOpenDevice: open result is -1, (No such device) [ 22.690] ukiOpenDevice: open result is -1, (No such device) [ 22.690] ukiOpenDevice: Open failed [ 22.690] ukiOpenDevice: node name is /dev/ati/card8 [ 22.690] ukiOpenDevice: open result is -1, (No such device) [ 22.690] ukiOpenDevice: open result is -1, (No such device) [ 22.690] ukiOpenDevice: Open failed [ 22.690] ukiOpenDevice: node name is /dev/ati/card9 [ 22.690] ukiOpenDevice: open result is -1, (No such device) [ 22.690] ukiOpenDevice: open result is -1, (No such device) [ 22.690] ukiOpenDevice: Open failed [ 22.690] ukiOpenDevice: node name is /dev/ati/card10 [ 22.690] ukiOpenDevice: open result is -1, (No such device) [ 22.690] ukiOpenDevice: open result is -1, (No such device) [ 22.690] ukiOpenDevice: Open failed [ 22.690] ukiOpenDevice: node name is /dev/ati/card11 [ 22.690] ukiOpenDevice: open result is -1, (No such device) [ 22.690] ukiOpenDevice: open result is -1, (No such device) [ 22.690] ukiOpenDevice: Open failed [ 22.690] ukiOpenDevice: node name is /dev/ati/card12 [ 22.690] ukiOpenDevice: open result is -1, (No such device) [ 22.690] ukiOpenDevice: open result is -1, (No such device) [ 22.690] ukiOpenDevice: Open failed [ 22.690] ukiOpenDevice: node name is /dev/ati/card13 [ 22.690] ukiOpenDevice: open result is -1, (No such device) [ 22.690] ukiOpenDevice: open result is -1, (No such device) [ 22.690] ukiOpenDevice: Open failed [ 22.690] ukiOpenDevice: node name is /dev/ati/card14 [ 22.690] ukiOpenDevice: open result is -1, (No such device) [ 22.690] ukiOpenDevice: open result is -1, (No such device) [ 22.690] ukiOpenDevice: Open failed [ 22.690] ukiOpenDevice: node name is /dev/ati/card15 [ 22.690] ukiOpenDevice: open result is -1, (No such device) [ 22.690] ukiOpenDevice: open result is -1, (No such device) [ 22.690] ukiOpenDevice: Open failed [ 22.690] ukiDynamicMajor: found major device number 249 [ 22.690] ukiOpenByBusid: Searching for BusID PCI:0:1:0 [ 22.690] ukiOpenDevice: node name is /dev/ati/card0 [ 22.690] ukiOpenDevice: open result is 15, (OK) [ 22.690] ukiOpenByBusid: ukiOpenMinor returns 15 [ 22.690] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0 [ 22.834] (II) fglrx(0): Setting screen physical size to 508 x 285 [ 23.074] (II) config/udev: Adding input device Power Button (/dev/input/event3) [ 23.074] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 23.074] (**) Power Button: Applying InputClass "keyboard" [ 23.074] (II) LoadModule: "evdev" [ 23.074] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 23.107] (II) Module evdev: vendor="X.Org Foundation" [ 23.107] compiled for 1.16.4, module version = 2.9.1 [ 23.107] Module class: X.Org XInput Driver [ 23.107] ABI class: X.Org XInput driver, version 21.0 [ 23.107] (II) Using input driver 'evdev' for 'Power Button' [ 23.107] (**) Power Button: always reports core events [ 23.107] (**) evdev: Power Button: Device: "/dev/input/event3" [ 23.107] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 23.108] (--) evdev: Power Button: Found keys [ 23.108] (II) evdev: Power Button: Configuring as keyboard [ 23.108] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event3" [ 23.108] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 23.108] (**) Option "xkb_rules" "evdev" [ 23.108] (**) Option "xkb_model" "pc104" [ 23.108] (**) Option "xkb_layout" "us,ru" [ 23.108] (**) Option "xkb_options" "grp:caps_toggle,grp_led:scroll" [ 23.140] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 23.140] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 23.140] (**) Power Button: Applying InputClass "keyboard" [ 23.140] (II) Using input driver 'evdev' for 'Power Button' [ 23.140] (**) Power Button: always reports core events [ 23.140] (**) evdev: Power Button: Device: "/dev/input/event2" [ 23.140] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 23.140] (--) evdev: Power Button: Found keys [ 23.140] (II) evdev: Power Button: Configuring as keyboard [ 23.140] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5/event2" [ 23.140] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7) [ 23.140] (**) Option "xkb_rules" "evdev" [ 23.140] (**) Option "xkb_model" "pc104" [ 23.140] (**) Option "xkb_layout" "us,ru" [ 23.140] (**) Option "xkb_options" "grp:caps_toggle,grp_led:scroll" [ 23.140] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=8 (/dev/input/event7) [ 23.140] (II) No input driver specified, ignoring this device. [ 23.140] (II) This device may have been added with another device file. [ 23.140] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=9 (/dev/input/event8) [ 23.140] (II) No input driver specified, ignoring this device. [ 23.141] (II) This device may have been added with another device file. [ 23.141] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event5) [ 23.141] (II) No input driver specified, ignoring this device. [ 23.141] (II) This device may have been added with another device file. [ 23.141] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7 (/dev/input/event6) [ 23.141] (II) No input driver specified, ignoring this device. [ 23.141] (II) This device may have been added with another device file. [ 23.141] (II) config/udev: Adding input device USB 2.0 UVC 1.3M WebCam (/dev/input/event4) [ 23.141] (**) USB 2.0 UVC 1.3M WebCam: Applying InputClass "evdev keyboard catchall" [ 23.141] (**) USB 2.0 UVC 1.3M WebCam: Applying InputClass "keyboard" [ 23.141] (II) Using input driver 'evdev' for 'USB 2.0 UVC 1.3M WebCam' [ 23.141] (**) USB 2.0 UVC 1.3M WebCam: always reports core events [ 23.141] (**) evdev: USB 2.0 UVC 1.3M WebCam: Device: "/dev/input/event4" [ 23.141] (--) evdev: USB 2.0 UVC 1.3M WebCam: Vendor 0x13d3 Product 0x5150 [ 23.141] (--) evdev: USB 2.0 UVC 1.3M WebCam: Found keys [ 23.141] (II) evdev: USB 2.0 UVC 1.3M WebCam: Configuring as keyboard [ 23.141] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2:1.0/input/input7/event4" [ 23.141] (II) XINPUT: Adding extended input device "USB 2.0 UVC 1.3M WebCam" (type: KEYBOARD, id 8) [ 23.141] (**) Option "xkb_rules" "evdev" [ 23.141] (**) Option "xkb_model" "pc104" [ 23.141] (**) Option "xkb_layout" "us,ru" [ 23.141] (**) Option "xkb_options" "grp:caps_toggle,grp_led:scroll" [ 23.142] (II) config/udev: Adding input device RAPOO RAPOO 2.4G Wireless Device (/dev/input/event0) [ 23.142] (**) RAPOO RAPOO 2.4G Wireless Device: Applying InputClass "evdev keyboard catchall" [ 23.142] (**) RAPOO RAPOO 2.4G Wireless Device: Applying InputClass "keyboard" [ 23.142] (II) Using input driver 'evdev' for 'RAPOO RAPOO 2.4G Wireless Device' [ 23.142] (**) RAPOO RAPOO 2.4G Wireless Device: always reports core events [ 23.142] (**) evdev: RAPOO RAPOO 2.4G Wireless Device: Device: "/dev/input/event0" [ 23.142] (--) evdev: RAPOO RAPOO 2.4G Wireless Device: Vendor 0x24ae Product 0x2000 [ 23.142] (--) evdev: RAPOO RAPOO 2.4G Wireless Device: Found keys [ 23.142] (II) evdev: RAPOO RAPOO 2.4G Wireless Device: Configuring as keyboard [ 23.142] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb6/6-2/6-2:1.0/0003:24AE:2000.0001/input/input3/event0" [ 23.142] (II) XINPUT: Adding extended input device "RAPOO RAPOO 2.4G Wireless Device" (type: KEYBOARD, id 9) [ 23.142] (**) Option "xkb_rules" "evdev" [ 23.142] (**) Option "xkb_model" "pc104" [ 23.142] (**) Option "xkb_layout" "us,ru" [ 23.142] (**) Option "xkb_options" "grp:caps_toggle,grp_led:scroll" [ 23.142] (II) config/udev: Adding input device RAPOO RAPOO 2.4G Wireless Device (/dev/input/event1) [ 23.142] (**) RAPOO RAPOO 2.4G Wireless Device: Applying InputClass "evdev pointer catchall" [ 23.142] (**) RAPOO RAPOO 2.4G Wireless Device: Applying InputClass "evdev keyboard catchall" [ 23.142] (**) RAPOO RAPOO 2.4G Wireless Device: Applying InputClass "keyboard" [ 23.142] (II) Using input driver 'evdev' for 'RAPOO RAPOO 2.4G Wireless Device' [ 23.142] (**) RAPOO RAPOO 2.4G Wireless Device: always reports core events [ 23.142] (**) evdev: RAPOO RAPOO 2.4G Wireless Device: Device: "/dev/input/event1" [ 23.143] (--) evdev: RAPOO RAPOO 2.4G Wireless Device: Vendor 0x24ae Product 0x2000 [ 23.143] (--) evdev: RAPOO RAPOO 2.4G Wireless Device: Found 9 mouse buttons [ 23.143] (--) evdev: RAPOO RAPOO 2.4G Wireless Device: Found scroll wheel(s) [ 23.143] (--) evdev: RAPOO RAPOO 2.4G Wireless Device: Found relative axes [ 23.143] (--) evdev: RAPOO RAPOO 2.4G Wireless Device: Found x and y relative axes [ 23.143] (--) evdev: RAPOO RAPOO 2.4G Wireless Device: Found absolute axes [ 23.143] (II) evdev: RAPOO RAPOO 2.4G Wireless Device: Forcing absolute x/y axes to exist. [ 23.143] (--) evdev: RAPOO RAPOO 2.4G Wireless Device: Found keys [ 23.143] (II) evdev: RAPOO RAPOO 2.4G Wireless Device: Configuring as mouse [ 23.143] (II) evdev: RAPOO RAPOO 2.4G Wireless Device: Configuring as keyboard [ 23.143] (II) evdev: RAPOO RAPOO 2.4G Wireless Device: Adding scrollwheel support [ 23.143] (**) evdev: RAPOO RAPOO 2.4G Wireless Device: YAxisMapping: buttons 4 and 5 [ 23.143] (**) evdev: RAPOO RAPOO 2.4G Wireless Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 23.143] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb6/6-2/6-2:1.1/0003:24AE:2000.0002/input/input4/event1" [ 23.143] (II) XINPUT: Adding extended input device "RAPOO RAPOO 2.4G Wireless Device" (type: KEYBOARD, id 10) [ 23.143] (**) Option "xkb_rules" "evdev" [ 23.143] (**) Option "xkb_model" "pc104" [ 23.143] (**) Option "xkb_layout" "us,ru" [ 23.143] (**) Option "xkb_options" "grp:caps_toggle,grp_led:scroll" [ 23.143] (II) evdev: RAPOO RAPOO 2.4G Wireless Device: initialized for relative axes. [ 23.143] (WW) evdev: RAPOO RAPOO 2.4G Wireless Device: ignoring absolute axes. [ 23.143] (**) RAPOO RAPOO 2.4G Wireless Device: (accel) keeping acceleration scheme 1 [ 23.143] (**) RAPOO RAPOO 2.4G Wireless Device: (accel) acceleration profile 0 [ 23.143] (**) RAPOO RAPOO 2.4G Wireless Device: (accel) acceleration factor: 2.000 [ 23.143] (**) RAPOO RAPOO 2.4G Wireless Device: (accel) acceleration threshold: 4 [ 23.144] (II) config/udev: Adding input device RAPOO RAPOO 2.4G Wireless Device (/dev/input/mouse0) [ 23.144] (**) RAPOO RAPOO 2.4G Wireless Device: Applying InputClass "keyboard" [ 23.144] (II) Using input driver 'evdev' for 'RAPOO RAPOO 2.4G Wireless Device' [ 23.144] (**) RAPOO RAPOO 2.4G Wireless Device: always reports core events [ 23.144] (**) evdev: RAPOO RAPOO 2.4G Wireless Device: Device: "/dev/input/mouse0" [ 23.144] (EE) evdev: RAPOO RAPOO 2.4G Wireless Device: Unable to query fd: Inappropriate ioctl for device [ 23.155] (EE) PreInit returned 2 for "RAPOO RAPOO 2.4G Wireless Device" [ 23.155] (II) UnloadModule: "evdev" [ 23.155] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9) [ 23.155] (II) No input driver specified, ignoring this device. [ 23.155] (II) This device may have been added with another device file. [ 23.155] (II) config/udev: Adding input device HD-Audio Generic Rear Mic (/dev/input/event10) [ 23.155] (II) No input driver specified, ignoring this device. [ 23.155] (II) This device may have been added with another device file. [ 23.156] (II) config/udev: Adding input device HD-Audio Generic Front Mic (/dev/input/event11) [ 23.156] (II) No input driver specified, ignoring this device. [ 23.156] (II) This device may have been added with another device file. [ 23.156] (II) config/udev: Adding input device HD-Audio Generic Line Out (/dev/input/event12) [ 23.156] (II) No input driver specified, ignoring this device. [ 23.156] (II) This device may have been added with another device file. [ 23.156] (II) config/udev: Adding input device HD-Audio Generic Front Headphone (/dev/input/event13) [ 23.156] (II) No input driver specified, ignoring this device. [ 23.156] (II) This device may have been added with another device file. [ 23.163] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments [ 40.179] (WW) fglrx(0): Failed to get EDID by ACPI [ 40.179] (II) fglrx(0): EDID vendor "GBT", prod id 8453 [ 40.179] (II) fglrx(0): Using hsync ranges from config file [ 40.179] (II) fglrx(0): Using vrefresh ranges from config file [ 40.179] (II) fglrx(0): Printing DDC gathered Modelines: [ 40.179] (II) fglrx(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 -hsync +vsync (67.5 kHz eP) [ 44.101] (WW) fglrx(0): Failed to get EDID by ACPI [ 44.101] (II) fglrx(0): EDID vendor "GBT", prod id 8453 [ 44.101] (II) fglrx(0): Using hsync ranges from config file [ 44.101] (II) fglrx(0): Using vrefresh ranges from config file [ 44.101] (II) fglrx(0): Printing DDC gathered Modelines: [ 44.101] (II) fglrx(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 -hsync +vsync (67.5 kHz eP) [ 322.502] ukiDynamicMajor: found major device number 249 [ 322.502] ukiDynamicMajor: found major device number 249 [ 322.502] ukiDynamicMajor: found major device number 249 [ 322.502] ukiOpenDevice: node name is /dev/ati/card0 [ 322.502] ukiOpenDevice: open result is 70, (OK) [ 322.502] ukiGetBusid returned 'PCI:0:1:0' [ 322.502] ukiOpenDevice: node name is /dev/ati/card1 [ 322.502] ukiOpenDevice: open result is -1, (No such device) [ 322.502] ukiOpenDevice: open result is -1, (No such device) [ 322.502] ukiOpenDevice: Open failed [ 322.502] ukiOpenDevice: node name is /dev/ati/card2 [ 322.502] ukiOpenDevice: open result is -1, (No such device) [ 322.502] ukiOpenDevice: open result is -1, (No such device) [ 322.502] ukiOpenDevice: Open failed [ 322.502] ukiOpenDevice: node name is /dev/ati/card3 [ 322.502] ukiOpenDevice: open result is -1, (No such device) [ 322.502] ukiOpenDevice: open result is -1, (No such device) [ 322.502] ukiOpenDevice: Open failed [ 322.502] ukiOpenDevice: node name is /dev/ati/card4 [ 322.502] ukiOpenDevice: open result is -1, (No such device) [ 322.502] ukiOpenDevice: open result is -1, (No such device) [ 322.502] ukiOpenDevice: Open failed [ 322.503] ukiOpenDevice: node name is /dev/ati/card5 [ 322.503] ukiOpenDevice: open result is -1, (No such device) [ 322.503] ukiOpenDevice: open result is -1, (No such device) [ 322.503] ukiOpenDevice: Open failed [ 322.503] ukiOpenDevice: node name is /dev/ati/card6 [ 322.503] ukiOpenDevice: open result is -1, (No such device) [ 322.503] ukiOpenDevice: open result is -1, (No such device) [ 322.503] ukiOpenDevice: Open failed [ 322.503] ukiOpenDevice: node name is /dev/ati/card7 [ 322.503] ukiOpenDevice: open result is -1, (No such device) [ 322.503] ukiOpenDevice: open result is -1, (No such device) [ 322.503] ukiOpenDevice: Open failed [ 322.503] ukiOpenDevice: node name is /dev/ati/card8 [ 322.503] ukiOpenDevice: open result is -1, (No such device) [ 322.503] ukiOpenDevice: open result is -1, (No such device) [ 322.503] ukiOpenDevice: Open failed [ 322.503] ukiOpenDevice: node name is /dev/ati/card9 [ 322.503] ukiOpenDevice: open result is -1, (No such device) [ 322.503] ukiOpenDevice: open result is -1, (No such device) [ 322.503] ukiOpenDevice: Open failed [ 322.503] ukiOpenDevice: node name is /dev/ati/card10 [ 322.503] ukiOpenDevice: open result is -1, (No such device) [ 322.503] ukiOpenDevice: open result is -1, (No such device) [ 322.503] ukiOpenDevice: Open failed [ 322.503] ukiOpenDevice: node name is /dev/ati/card11 [ 322.503] ukiOpenDevice: open result is -1, (No such device) [ 322.503] ukiOpenDevice: open result is -1, (No such device) [ 322.503] ukiOpenDevice: Open failed [ 322.503] ukiOpenDevice: node name is /dev/ati/card12 [ 322.503] ukiOpenDevice: open result is -1, (No such device) [ 322.503] ukiOpenDevice: open result is -1, (No such device) [ 322.503] ukiOpenDevice: Open failed [ 322.503] ukiOpenDevice: node name is /dev/ati/card13 [ 322.503] ukiOpenDevice: open result is -1, (No such device) [ 322.503] ukiOpenDevice: open result is -1, (No such device) [ 322.503] ukiOpenDevice: Open failed [ 322.503] ukiOpenDevice: node name is /dev/ati/card14 [ 322.504] ukiOpenDevice: open result is -1, (No such device) [ 322.504] ukiOpenDevice: open result is -1, (No such device) [ 322.504] ukiOpenDevice: Open failed [ 322.504] ukiOpenDevice: node name is /dev/ati/card15 [ 322.504] ukiOpenDevice: open result is -1, (No such device) [ 322.504] ukiOpenDevice: open result is -1, (No such device) [ 322.504] ukiOpenDevice: Open failed [ 322.504] ukiDynamicMajor: found major device number 249 [ 322.504] ukiOpenByBusid: Searching for BusID PCI:0:1:0 [ 322.504] ukiOpenDevice: node name is /dev/ati/card0 [ 322.504] ukiOpenDevice: open result is 70, (OK) [ 322.504] ukiOpenByBusid: ukiOpenMinor returns 70 [ 322.504] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0